Monitoring Interval - Tandberg Data MSERIES RMC USER User Manual

Chapter 4 ALERT Library Management
Monitoring Configuration
Figure 21 Monitoring
Configuration
4

Monitoring Interval

48 Tandberg Data M-Series Remote Management Card User's Guide
To set the monitoring interval time in minutes:
In the
1 Monitoring Interval
number of minutes between monitors. The monitoring
determines the polling frequency for library configuration
changes. The interval entered must be between 0 and 60
minutes.
The default monitoring value is 5 minutes. If the
Note:
monitoring interval is changed to 0 (zero), no library
configuration changes are reported, and no
configuration change e-mails are sent.
Press . A
2 Apply Results
information has been saved.
Press to return to the
3 OK
section of the page, type the desired
page indicates the monitoring interval
Monitoring Configuration
page.