Monitoring Configuration; Accessing Monitoring Configuration - Tandberg Data MSERIES RMC USER User Manual

Monitoring Configuration

Accessing
Monitoring
4
Configuration
Tandberg Data M-Series Remote Management Card User's Guide
The entire
Note:
depending on the network connection speed and the
image file size.
the upload to finish. At the end of the upload, the
library automatically resets itself.
During the firmware upload process, a progress
window is displayed indicating the current operation
being performed to complete the firmware upload
process.
In a multiframe environment, the master frame is
updated first, the succeeding frames are updated.
The
Monitoring Configuration
and report interval.
To view the Monitoring Configuration page:
In the navigation frame, under
1
Monitoring Configuration
Monitoring Configuration
Chapter 4 ALERT Library Management
process may take up to 45 minutes
Upload
Do not interrupt the process.
page allows you to set the monitoring
Library Management
. The management frame displays the
page as shown in
Monitoring Configuration
Wait for
4
, press
figure 21.
47