Chapter 2 Alert Snmp; Alert Snmp Configuration - Tandberg Data MSERIES RMC USER User Manual

Chapter 2
ALERT SNMP

ALERT SNMP Configuration

Tandberg Data M-Series Remote Management Card User's Guide
Remote ALERT SNMP is managed through the following
Management Console Web pages, accessible using Internet browser
software installed on the host computer:
• SNMP Configuration
information about SNMP and select categories containing
predefined traps.
• Community Management
communities that have access to the ALERT SNMP option, and
define their read-write privileges.
Consult your system administrator before changing any information
on this page. To view or edit the SNMP configuration of the
M-Series Remote Management Card:
In the navigation frame, under
1
. The management frame displays the
Configuration
page as shown in
Configuration
on page 18 allows you to set up
on page 20 allows you to set up the
ALERT SNMP
figure 8.
2
, press
SNMP
SNMP
17