Absolute Maximum And Minimum Ratings; Storage Conditions Specifications; Table 7-39 Processor Absolute Minimum And Maximum Ratings - Intel PENTIUM P6000 - DATASHEET 2010 Datasheet

Electrical Specifications
7.8

Absolute Maximum and Minimum Ratings

Table 7-39
functional operation condition limits, but within absolute maximum and minimum
ratings, neither functionality nor long-term reliability can be expected. If a device is
returned to conditions within functional operation limits after having been subjected to
conditions outside these limits (but within the absolute maximum and minimum
ratings) the device may be functional, but with its lifetime degraded depending on
exposure to conditions exceeding the functional operation condition limits.
At conditions exceeding absolute maximum and minimum ratings, neither functionality
nor long-term reliability can be expected. Moreover, if a device is subjected to these
conditions for any length of time it will either not function or its reliability will be
severely degraded when returned to conditions within the functional operating
condition limits.
Although the processor contains protective circuitry to resist damage from Electro-
Static Discharge (ESD), precautions should always be taken to avoid high static
voltages or electric fields.
Table 7-39.Processor Absolute Minimum and Maximum Ratings
Symbol
V Processor Core voltage with respect to V
CC
V Voltage for the memory controller and Shared Cache
TT
with respect to V
V Processor I/O supply voltage for DDR3 with respect to
DDQ
V
SS
V Processor PLL voltage with respect to V
CCPLL
V Graphics voltage with respect to V
AXG
SV
ULV
NOTES:
1. For functional operation, all processor electrical, signal quality, mechanical and thermal specifications must
be satisfied.
2. V and V are VID based rails.
CC AXG
7.9

Storage Conditions Specifications

Environmental storage condition limits define the temperature and relative humidity to
which the device is exposed to while being stored in a moisture barrier bag. The
specified storage conditions are for component level prior to board attach.
Table 7-40
represent the maximum or minimum device condition beyond which damage, latent or
otherwise, may occur. The table also specifies sustained storage temperature, relative
humidity, and time-duration limits. these limits specify the maximum or minimum
Datasheet
specifies absolute maximum and minimum ratings. At conditions outside
Parameter
SS
SS
SS
SS
specifies absolute maximum and minimum storage temperature limits which
Min Max Unit
-0.3 1.40 V
-0.3 1.40 V
-0.3 1.80 V
-0.3 1.98 V
V
-0.3 1.55
-0.3 1.55
Notes
1, 2
93