Table of Contents
Advertisement
Server Utilities
9. Re-enter the values you wrote down at the beginning of this process. Press F10 and <Enter> to
exit BIOS Setup and Save Changes.
10. If you do not set the CMOS values back to defaults using the F9 key, the system may function
erratically.
NOTE
You may encounter a CMOS Checksum error or other problem after reboot.
If this happens, shut down the system and boot it again. CMOS checksum
errors require that you enter Setup, check your settings, save your settings,
and exit Setup.
Changing the BIOS Language
You can use the BIOS upgrade utility to change the language the BIOS uses for messages and the
Setup program. Use a bootable diskette containing the Intel flash utility and language files.
1. Boot the computer with the bootable diskette in drive A. The BIOS upgrade utility screen
appears.
2. Select
Update Flash Memory From a File
3. Select
Update Language Set
4. Select drive A and use the arrow keys to select the correct
5. When the utility asks for confirmation that you want to flash the new language into memory,
select
Continue with Programming
6. When the utility displays the message
<Enter>.
7. The computer will reboot and the changes will take effect.
Recovering the BIOS
In the rare event that the BIOS becomes damaged, a recovery process needs to be followed to return
the system to service. Two methods are available to recover the BIOS: automatically with the crisis
recovery diskette, and manually by moving a jumper on the system board. These methods are
described below.
NOTE
BIOS recovery is the mode of last resort, used only when the main system
BIOS will not come up.
60
.
. Press <Enter>.
. Press <Enter>.
upgrade is complete
®
Intel
Entry Server Platform SR1325TP1-E User Guide
file. Press
.lng
<Enter>
, remove the diskette. Press
.
Advertisement
Table of Contents
