Installing A Floppy / Cd-Rom And / Or Dvd-Rom Drive (Optional Accessory Kit); Replacing A Floppy Drive, Cd-Rom Drive / Dvd-Rom Drive - Intel SR1325TP1 - Entry Server Platform User Manual

Platform Installations and Upgrades
Installing a Floppy / CD-ROM and / or DVD-ROM Drive
(optional accessory kit)
Your server chassis comes with the backplane board and cable that are required for installing a
floppy drive, CD-ROM drive, or DVD-ROM drive. If you want to install one of these drives, you
need to purchase the following items separately:
Floppy, CD-ROM or DVD-ROM drive, CD-ROM/DVD-ROM combo drive.
You can install one of the following drive combinations:
Floppy drive alone
CD-ROM drive alone
DVD-ROM drive alone
CD-ROM/DVD-ROM combo drive
Floppy drive and CD-ROM drive
Floppy drive and DVD-ROM drive
Floppy drive and CD-ROM/DVD-ROM combo drive
Follow the installation instructions that are included with the drive kit to install these drives.
Replacing a Floppy Drive, CD-ROM Drive / DVD-ROM
Drive
CAUTION
A floppy drive, CD-ROM / DVD-ROM drive is NOT hot swappable. Before
replacing it, you must first take the server out of service, turn off all
peripheral devices connected to the system, turn off the system by
pressing the power button, and unplug the AC power cord from the
system or wall outlet.
38
®
Intel Entry Server Platform SR1325TP1-E User Guide