Command-Line Switches For The Pocket Pc Agent; Command-Line Install Switches For Linux - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Command-line Switches for the Pocket PC Agent

Option
-install
-silent
-stop
-start
-restart
-remove

Command-line Install Switches for Linux

Deployment Solution
Wake On LAN
Remote Power Up
Power Switch/Wake-up
You can manage the Pocket PC Agent through command-line switches. The default path
of the agent executable file is:
The following table shows the optional switches and the functions they perform.
Note
If PPCAgent.exe is run and if the agent has not previously been installed, then the agent
will be installed automatically. If the agent was previously installed, it will simply load
the agent.
Command Line Switches for the Pocket PC Agent
Function
Installs the agent, or re-installs the agent if already
installed.
When used with
installation dialog screens.
Stops the agent.
Starts the agent after it has been stopped.
Stops and restarts the agent.
Stops and uninstalls the agent.
Example: to restart the agent, run
C:\Altiris\PPCAgent\PPCAgent.exe -restart
To use more than one command-line parameter, separate the parameters with a space.
Example:
ppcagent -install -silent.
The command-line switches used for Linux files are "express path where the bootwiz.exe
is present" -install -os LINUX -x86/x64/ia64" path where the .FRM file is present. The
following table lists the Command-line Install and Silent Install Switches for Linux and
the functions they perform.
Switch
-install -os LINUX -x86
"e:\BDCgpl_6.8.8260.frm"
-install -os LINUX -x64
"e:\BDCgpl_6.8.8260.frm"
ON/ENABLED
ON/ENABLED
ON/ENABLED
C:\Altiris\PPCAgent\PPCAgent.exe
, installs the agent without the
-install
Details
Installs the Linux agent for x86
computers.
Installs the Linux agent for x64
computers.
Command-Line Switches
.
413