Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual page 224

Deployment Solution
2. Run the System Image Utility (Applications > Server > System Image Utility).
3. In the left pane, select the image you mounted in step 1.
4. In the right pane, select NetBoot Image then click Continue.
5. Provide Automation as the image name, then click Create.
6. When the creation completes, provide Automation as the folder name and save it to
the
/Library/NetBoot/NeBootSP0
the folder to a different location and then copy it to the correct location after the
operation completes.
7. Your NetBoot server should now have a folder at
NetBootSP0/Automation.nbi
You are now ready to start the NetBoot service.
10.4 or Previous
1. On your NetBoot server, double-click
mount the captured image as a volume.
2. Run the System Image utility (Applications > Server > Network (OS 10.3) or
System (OS 10.4) Image Utility).
3. In the upper pane, select New Boot.
4. Provide Automation as the image name.
5. Provide an image ID.
Example:
1300
6. Leave the default NFS option selected.
7. On the Contents tab, select disk image, then browse to the image file volume you
mounted in step 1.
8. Click Create.
9. Provide Automation as the folder name and save it to the
folder. If that location is unavailable, save the folder to a different
NetBootSP0
location and then copy it to the correct location after the operation completes.
Your NetBoot server should now have a folder at
containing the following:
Automation.nbi
System.dmg
booter
mach.macosx (10.3 only)
mach.macosx.mkext
NBImageInfo.plist
You are now ready to start the NetBoot service.
folder. If that location is unavailable, save
/Library/NetBoot/
containing the following:
/Volumes/NetBootSP0/System.dmg
/Library/NetBoot/
/Library/NetBoot/NetBootSP0/
Mac Imaging
to
224