Deployment Web Console - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Deployment Web console

Deployment Server system requirements
Altiris Deployment Solution™ from Symantec User's Guide
The Deployment Web console remotely manages a Deployment Server installation from
a Web browser. It deploys and manages Windows and Linux computers (both client and
server editions) in real time with many of the features that are present in the
Deployment Console.
See Deployment Console
You can install the Deployment Web console on any computer running the Microsoft IIS
Server, such as a computer running Deployment Server, Notification Server, or a
remote computer running only Microsoft IIS.
Note
If Microsoft IIS is running, the Deployment Web console is installed automatically during
the Windows installation.
Note
The DS Installer does not detect the version of MDAC that is installed. The Deployment
Web console requires MDAC version 2.71 or later to install. If the version of MDAC is
earlier than 2.71, the Web console displays a Target of Invocation error.
See Deployment Console
page 335.
The following are the system requirements for Deployment Server components and the
network environment.
Network
TCP/IP is used for communication between all Deployment Server components. If
you have a NetWare file server for your Deployment Share, IPX can also be used to
communicate with this component.
Deployment Server
RAM: 256 MB
Disk Space: 200 MB
Component Hardware
All components require Pentium III processors
Deployment RAM: 256 MB
Server
Disk Space: 200 MB
Deployment RAM: 128 MB
Console
Disk Space: 3.5 MB
on page 335.
on page 335 and Deployment Server components on
Software
Windows Server
Windows XP Professional
Windows Server
339