Have Disk; Internet; Advanced - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Deployment Solution
If the network adapter you want does not appear in the list, click Have Disk, Internet,
or Advanced to add additional drivers. See
page 302, and

Advanced

Field Definitions
Auto-detect network adapter: Select this option to let WinPE auto-detect the type of
adapter that is in the client computers when the boot image runs.

Have Disk

You can add network adapter drivers by using any disk media or navigating to a folder.
You can download the Network adapters from the manufacturer's Web site and save it to
a folder or a disk to install later. New network adapters come with a floppy disk or CD to
install the appropriate drivers.

Internet

Altiris supports many manufacturer network adapters and supports a Web site for you to
download the latest NIC drivers. From the Network Adapter page, click Internet to
launch the Web browser and use the ftp://support.altiris.com/support/NIC_drivers/ link.
Download the driver you want and unzip the files to a folder on the hard drive. Click Add
Driver to add the driver to the Network Adapters list.
Advanced
These options lets you add or change settings for the network adapter cards so they
work correctly when using DOS configurations. This option is not available when you
create a Linux or WinPE configuration. In the Network Adapter page, click Advanced.
Refer to the following properties and values:
Microsoft clients
EMM386 Memory (config.sys): Append memory address information to this line
in the config.sys file.
Advanced settings (protocol.ini): Add parameters to the NIC section of the
protocol.ini file.
Memory (protocol.ini): Add parameters to the network setup section of the
protocol.ini file.
IRQ (protocol.ini): Add parameters to the network setup section of the protocol.ini
file.
Novell VLM clients
Emm386 memory (config.sys): Append memory address information to this line
in the config.sys file.
Advanced settings (config.sys): Add parameters to the NIC section of the
net.cfg file.
Novell Client 32
Emm386 Memory (config.sys): Append memory address information to this line
in the config.sys file.
Have Disk
on page 302.
PXE Configuration Utility
on page 302, Internet on
302