Using Lab Builder - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Using lab builder

Altiris Deployment Solution™ from Symantec User's Guide
1. In the Search For field, type all or part of the computer's property values you
would like to search for. This alpha-numeric string is compared with specified
database fields.
2. From the In Field drop-down list, select the field you want to search in the
Deployment Database.
Example: To find a computer by searching for its IP address, type the address in the
Search For field and select the IP Address from the In Field drop-down list.
Name BIOS name of the computer.
Computer Deployment Solution name of the computer.
Name
MAC Address Example: 0080C6E983E8.
IP Address Example: 192.168.1.1.
ID Example: The computer ID. 5000001.
Serial Number Serial number installed in BIOS. A primary lookup key.
Asset Tag Asset number in BIOS. A primary lookup key.
UUID A primary lookup key.
Registered Name entered when the operating system was installed.
User
Product Key Product Key for the operating system.
Logged On Name of the user currently at the computer.
User
Physical Bay The actual bay number. Example: 7x.
Name
The computer you are looking for appears highlighted in the Computers window in the
console.
Note
This search is not case-sensitive and allows wildcard searches using *.
See also Computer filters and job conditions
Use the Lab Builder to set up jobs under the Lab folder in the Jobs pane to set up a
classroom or lab environment.
Click Lab Builder on the console toolbar or click File > New > Lab Builder
to set up jobs specifically created for managing multiple computers in a lab
environment.
on page 80.
141