Wlogevent Vb Script (Windows); Xp Embedded; Disable Enhanced Write Filter; Enable Enhanced Write Filter - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Component Service
Deployment Altiris eXpress
Server Server
Deployment
Console (Win32
Console)
Deployment
Altiris Network
Agent on Linux Management Client
(ADLAgent) for Linux
Deployment Altiris Client Service
Agent on
Windows
(AClient)
Altiris Client Service
PXE MTFTP
PXE Manager and PXECfg Service
Deployment Solution
Port
402
5001
5002
415
402
401
The Altiris PXE MTFTP Server service is used to transfer file data between the PXE Server
and the PXE Booting client. This service supports both MTFTP and TFTP standard
interfaces.
To configure the 1758 and 1759 ports
1. Go to the datastore path.
Note: By default, the path is: C:\Program Files\Altiris\eXpress\Deployment
Server.
2. Open the PXE folder.
3. Open the pxe.INI file in a text editor.
4. In the [MTFTPD] section, set the MCAST_CLNT_PORT value to 1758 and the
MCAST_SRVR_PORT value to 1759.
5. Save the pxe.INI file.
6. Restart PXE services.
The Altiris PXE Manager Service controls the data associated with the PXE components
that are included in the PXE package. The PXE Configuration Utility and PXE Servers use
Protocol Where is this
port
connected?
TCP/UDP Agents, PXE
(multicast) Server,
DataManager,
PXEManager
TCP AClient
TCP AClient
TCP Remote Client
UDP Deployment
Server
UDP AClient (Wake-
on-LAN Proxy)
Network Ports
Is this port
configurable?
Yes
Yes
Yes
Yes
Yes
No
474