Memory Error Messages - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Error Message
"Out of range index . . . in
removeItem. ElementCount is . .
."
"Error removing child subtree."
"Invalid item to remove."
"Error: Attempted removal of
top-level container segment."
"Error: unable to copy source
segment."
"Error getting download info
space requirements."
"Error getting image info space
requirements."
"Error getting bitmap space
requirements."
"Error encoding image info into
buffer."
"Error encoding bitmap."
"Container segment has invalid
Partition-table slot . . ."

Memory Error Messages

Error Message
"Insufficient memory for . .
."
"Ran out of memory while . .
."
"Exception . . . while
allocating . . ."
"Error adding . . ."
Deployment Solution
Description
Explanation: Internal program error.
Action: Please report the error to Altiris. Write down the
error code and message and a description of what was
happening just before the error occurred.
Explanation: A partition table in an extended partition
contains a reference to a nonexistent slot in the partition
table.
Action: Please report this error to Altiris.
Description
Explanation: The program is out of memory.
Possible cause: The Altiris program requires 16 MB to run.
It could also be a lack of conventional memory.
Action: Add the
emm386.exe
devices, and so on as possible into high memory. Check the
Altiris support forum for information on memory errors.
Explanation: There was a problem building an internal list
structure.
Possible cause: This is almost always a result of memory
exhaustion.
file, and load as many drivers,
Error Codes
449