Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual page 395

Deployment Solution
Parameters
PromptReboot
PromptExecute
PromptRemoteControl
PromptSeconds
PromptOverride
Connection
ConnectionParadigm
UseHardTimeout
HardTimeout
ReconnectInterval
CloseTimeOut
SetSpeedLimit
Details
Prompt before executing shutdown and restart
commands.
Example: PromptReboot=Yes.
Prompt before executing program execution and file
copy commands.
Example: PromptExecute=Yes.
Prompt before executing remote control commands.
Example: PromptRemoteControl=Yes.
Specifies how long the user prompt should appear in
seconds.
Example: PromptSeconds=10.
Specifies whether the AClient should continue the
operation or abort it, when the user prompt times out.
Example: PromptOverride=Continue.
Specfies whether to select to either stay connected to
the Deployment Server, or check periodically for work.
To remain connected, ConnectionParadigm=0. To
remain mostly disconnected, ConnectionParadigm=1.
Example: ConnectionParadigm=0 or
ConnectionParadigm=1.
Specifies whether to refresh connection after idle time
specified in HardTimeout. ConnectionParadigm must
be 0 for this setting to work.
Example: UseHardTimeout=Yes.
Specifies how frequently to refresh the connection to
the server in seconds. ConnectionParadigm must be 0
and UseHardTimeout must be Yes for this setting to
work.
Example: HardTimeout=28800.
Specifies how often in seconds to reconnect to check
for work. ConnectionParadigm must be 1 for this
setting to work.
Example: ReconnectInterval=28800.
Specifies how long, in seconds, to wait for work before
disconnecting. ConnectionParadigm must be 1 for this
setting to work.
Example: CloseTimeOut=60.
Specifies whether to set speed limit for transfer files. If
it is Yes, check transfer rate is slower than the rate
specified in SpeedLimit. If it is No, do not transfer files.
Example: SetSpeedLimit=Yes.
Command-Line Switches
395