Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual page 418

RapiDeploy Command-line Switches (Continued)
Switch [parameters]
-cfgfile:[filename]
-cmdline
Deployment Solution
Details
Function Sets the configuration filename (default is
lastrun.cfg). The configuration file provides information for post
configuration. The default configuration file is lastrun.cfg that
can be edited in a text editor with the specific information
needed for the computer.
This command is useful if you want to run imaging in a batch file
using configuration information saved previously by the
RapiDeploy program. (If you select the option to save settings in
the RapiDeploy program, a configuration file will be created with
the name lastrun.cfg.) You can rename lastrun.cfg and specify it
in your batch file to apply configuration settings.
Example If you have run RapiDeploy and have chosen the
option to save configuration settings, you could rename
lastrun.cfg to laptop1.cfg and use it in a batch file by typing the
following:
[filename]
rdeploy -md -f
You can also put configuration files in a shared directory and
load them from the network.
See also
-m[mode], -f[path & file name]
Function In text mode, display the command-line options.
RapiDeploy Technical Reference
-cfgfile:laptop1.cfg
418