Debug Option - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Debug Option

Altiris® Deployment Server® Configuration Utility
Define IP Addresses
Select the Allow/reject agents based on their IP address check box and click
Define IP Addresses. The TCP/IP Connection Filters dialog appears. You can add,
modify or remove a Start IP address and the corresponding End IP address. You can
also specify whether to allow or reject only these IPs to connect.
Define Interfaces
Select the Allow/reject agents based on local interfaces check box and click
Define Interfaces. The TCP/IP Interface Filters dialog appears. You can specify
whether to allow or reject only these interfaces to connect. The default option is to
reject only the selected interfaces. A list of network adapter cards is displayed. Select
from the list of network adapter cards to allow or reject when connecting to the
Deployment Server.
The Debug tab lets you set debug options for the Deployment Server and
communication between managed computers.
Engine Debug Logging. Select this check box to set the name and location of the
logging report and the logging level for Deployment Server. The Engine Debug Log is a
single report that captures debug information for Altiris support personnel.
Log File Name: Set the path and name for the log text file. The default name is
axengine.log in the Deployment Server shared directory.
Max File Size: Set the size of the text file by entering the maximum file size
allowed in KB.
Logging Level: Specify the logging level. This number can be from 1 to 9, where 9
is the deepest logging level and 1 is the most cursory logging level. You can contact
Altiris support for information on the required logging level.
Log Agent Communication with Engine. Select this check box to set the directory
path and name to log error messages between managed computers and the Deployment
Server.
Log Directory. Set the path of the folder to collect the client error messages. Each
managed computer has its own log file in this directory named <the computer ID of
the managed computer>.log.
Max File Size. Set the size of each log file by entering the maximum file size
allowed in KB.
Deployment Server Configuration Utility
272