1. Manuals
  2. Brands
  3. Symantec Manuals
  4. Software
  5. BRIGHTMAIL - SYM ANTISPAM AND
  6. Installation manual

Symantec BRIGHTMAIL - SYM ANTISPAM AND Installation Manual

Installation guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
™
Symantec Brightmail AntiSpam
Version 6.0
Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for Symantec BRIGHTMAIL - SYM ANTISPAM AND

Summary of Contents for Symantec BRIGHTMAIL - SYM ANTISPAM AND

  • Page 1 ™ Symantec Brightmail AntiSpam Version 6.0 Installation Guide...
  • Page 2 Brightmail, the Brightmail logo, BLOC, BrightSig, Probe Network and The Anti-Spam Leader are trademarks or registered trademarks of Symantec Corporation. Symantec and the Symantec logo are U.S. registered trademarks and Symantec Security Response (SSR) is a trademark of Symantec Corporation. Symantec Brightmail AntiSpam is protected under U.S. Patent No. 6,052,709.

  • Page 3: Table Of Contents

    ..... . . 1 What’s New in Symantec Brightmail AntiSpam ..... . 2 Symantec Brightmail AntiSpam Architecture Overview .
  • Page 4 Adding a Brightmail Scanner ........77 Starting a Brightmail Scanner from the Brightmail Control Center . . 78 Symantec Brightmail AntiSpam™...
  • Page 5 ......... 87 Installing the Symantec Plug-in for Outlook ......87 Usage Scenarios .
  • Page 6 Table of Contents Symantec Brightmail AntiSpam™...

  • Page 7: Symantec Brightmail Antispam Overview

    • The Allowed Senders List and the Blocked Senders List filter messages based on the sender. You can create your own lists and subscribe to third-party lists. Symantec Brightmail AntiSpam includes the Brightmail Reputation Service, which consists of our Open Proxy List, Safe List and Suspect List.

  • Page 8: What's New In Symantec Brightmail Antispam

    Service as part of the Brightmail Reputation Service. Each list operates automatically and filters your messages using the same technology as Symantec’s other filters. The Brightmail Reputation Service includes the Open Proxy List, the Safe List and the Suspect List.

  • Page 9: Symantec Brightmail Antispam Architecture Overview

    BLOC keeps Symantec’s false positive rate extremely low (less than 1 in 1 million). Symantec also employs a carefully designed set of heuristic filters, which target patterns common in spam and add a proactive element to our spam-fighting arsenal. Commonly available heuristic filters can lead to large increases in false positives because of the problems inherent in a pattern-matching approach.

  • Page 10: Brightmail Scanner

    Symantec Brightmail AntiSpam. Figure 1. Symantec Brightmail AntiSpam Overview Brightmail Scanner Each installation of Symantec Brightmail AntiSpam can have one or more Brightmail Scanners. Brightmail Scanners perform the actual filtering of email messages. Each Brightmail Scanner contains: •...

  • Page 11: Brightmail Control Center

    Brightmail Control Center Each Symantec Brightmail AntiSpam installation has exactly one Brightmail Control Center. This is the central nervous system of your Symantec software. The Brightmail Control Center communicates with the Brightmail Agent on each of your Brightmail Scanners. For smaller installations, you can install the Brightmail Control Center and the Brightmail Scanner on the same computer.

  • Page 12: Group Policies, Email Categories, And Filtering Actions

    Figure 2. Symantec Brightmail AntiSpam Components Group Policies, Email Categories, and Filtering Actions Symantec Brightmail AntiSpam provides a wide variety of actions for filtering email, and allows you to either set identical options for all users, or specify different actions for different groups of users.
  • Page 13 • Spam – Email messages identified as spam using Symantec’s AntiSpam Filters. • Suspected spam – You can use Symantec’s Spam Scoring to identify a range of email as suspected spam, based on scores assigned by AntiSpam Filters. • Email from blocked senders – You can specify a list of blocked senders, and you can use third party blocked senders lists.

  • Page 14: Brightmail Filters

    Each characteristic is assigned a spam probability, and the message is given a cumulative probability score based on the overall test results. If a certain probability threshold is reached, Symantec Brightmail AntiSpam determines the message to be spam. Using heuristics, Symantec Brightmail AntiSpam software can make the determination that a message is spam, even if it hasn’t passed through the Probe Network.

  • Page 15: Content Filters

    • Define a custom Allowed Senders List – Allowed senders are approved or trusted senders. Unless AntiVirus Filters detect a virus or worm, Symantec Brightmail AntiSpam treats mail coming from an address or connection in your Allowed Senders List as legitimate mail.

  • Page 16: Antivirus Filters

    Because open proxy servers allow spammers to conceal their identities and off-load the cost of emailing to other parties, spammers will continually misuse a vulnerable server until it is brought offline or secured. Symantec recommends that organizations secure their proxy servers to ensure that spammers cannot connect to open ports and relay SMTP email.

  • Page 17: Brightmail Conduit

    The spam folder agents relieve end users and administrators of the burden of using their mail clients to create filters. The Symantec Spam Folder Agent for Domino also allows users to submit missed spam and false positives to Symantec.

  • Page 18: Installation Sequence

    Symantec Brightmail AntiSpam Overview Symantec Brightmail AntiSpam Overview The Symantec Plug-in for Outlook makes it easy for Outlook users to submit missed spam and false positives to Symantec. Depending on how you configure the plug-in, user submissions can also be sent automatically to a local system administrator. The Symantec Plug-in for Outlook also gives users the option to administer their own allowed senders and blocked senders lists.
  • Page 19 Symantec Brightmail AntiSpam Overview Add a Brightmail Scanner using the Brightmail Control Center as described in “Adding a Brightmail Scanner,” on page Make sure the Brightmail Scanner can be turned on by the Brightmail Control Center as described in “Starting a Brightmail Scanner from the Brightmail Control Center,”...
  • Page 20 Symantec Brightmail AntiSpam Overview Symantec Brightmail AntiSpam Overview Symantec Brightmail AntiSpam™...

  • Page 21: Installing Brightmail Scanner For Sendmail

    Installing Brightmail Scanner for Sendmail This section describes how to prepare for and install Brightmail Scanner for Sendmail. Brightmail Scanner contains the Brightmail Agent and also contains either a Brightmail Server, a Brightmail Client or both a Brightmail Server and a Brightmail Client. The following sections describe how to install Brightmail Scanner: Preparing to Install Brightmail Scanner •...

  • Page 22: Confirm Software And Location Requirements

    For more information on hardware requirements, see the Symantec Brightmail AntiSpam Deployment Planning Guide. Confirm Software and Location Requirements This version of Symantec Brightmail AntiSpam is supported for Sendmail on the following operating systems and contains these additional software requirements: • Solaris —...

  • Page 23: Enable Sendmail External Filtering

    Installing Brightmail Scanner for Sendmail over a secure connection. Consequently, TCP port 443 must be configured to allow outbound connections. Symantec Brightmail AntiSpam’s ability to identify spam accurately depends on NOTE: having access to messages in their original form. Software and hardware which modify message headers and/or the content or structure of message bodies may undermine Symantec Brightmail AntiSpam’s effectiveness.

  • Page 24: Create Required Accounts And Directories

    For Solaris users: $ su Password: your_root_password # groupadd bmi # useradd -c "dummy user for Brightmail" -d /opt/symantec/sbas/Scanner -m -g \ bmi mailwall For Linux users: $ su Password: your_root_password # groupadd -r bmi # useradd -c "dummy user for Brightmail"...

  • Page 25: Installing Brightmail Scanner For Sendmail

    These settings, along with many others, can be adjusted using the Brightmail NOTE: Control Center. For more information about doing so please refer to the Symantec Brightmail AntiSpam Administration Guide. Find and Run the Install Script An install script has been prepared for Linux and Solaris installations of Brightmail Scanner.
  • Page 26 Locate the two files, install EULA If you are installing from a downloaded tar file: a. Change to the directory that contains the Symantec Brightmail AntiSpam software. b. Untar the distribution file. For Solaris: $ tar -zxvf BAS_60x_sparc_solaris.tgz For Linux: $ tar -zxvf BAS_60x_x86_linux.tgz...

  • Page 27: Upgrading Software

    Installing Brightmail Scanner for Sendmail Upgrading Software You must upgrade all of your Brightmail Scanners before you upgrade your Brightmail Control Center. You can upgrade from either Version 6.0 or Version 6.0.1. Upgrading or migrating data from Version 5.5 or earlier versions is not supported. Use of the Settings >...
  • Page 28 If your Version 6.0.2 Brightmail Scanner includes a Brightmail Server, you must register the Brightmail Scanner. Because Symantec is now using (as of Version 6.0.1) a different licensing NOTE: technology for this product, to register you must contact your Symantec sales person or go to the following URL: http://www.symantecstore.com/renew...

  • Page 29: Installing With The Command-Line Installer

    From the Version 6.0.2 Brightmail Control Center, add the Brightmail Scanners. When your license key expires you will need to register using a license (. ) file. To purchase one, contact your Symantec sales person or go to the following URL: http:// . Then follow the instructions in “Registering to Receive...
  • Page 30 ------------ This installer will guide you through the installation of Brightmail Scanner, part of Symantec Brightmail AntiSpam. Respond to each prompt to proceed to the next step in the installation. If you want to change something on a previous step, type 'back'.
  • Page 31 Choose Install Folder --------------------- Where would you like to install Brightmail Scanner? Default Install Folder: /opt/symantec/sbas/Scanner ENTER AN ABSOLUTE PATH, OR PRESS <ENTER> TO ACCEPT THE DEFAULT If you are upgrading from Version 6.0 or Version 6.0.1, you will NOTE: not be asked for the installation directory location.
  • Page 32 Brightmail Scanner installation. Brightmail Server only – Installs all server components of a Brightmail Scanner. No Sendmail integration is installed. Sendmail does not need to be on the same machine as the Brightmail Scanner installation. Symantec Brightmail AntiSpam™...
  • Page 33 Pre-Installation Summary ------------------------ Please review the following before continuing: Product Name: Brightmail Scanner Install Folder: /opt/symantec/sbas/Scanner Install Set Complete Installation Log Folder: /var/log/brightmail PRESS <ENTER> TO CONTINUE: When performing a client-only installation, you will see this screen after accepting the...
  • Page 34 ENTER THE NUMBER FOR YOUR CHOICE, OR PRESS <ENTER> TO ACCEPT THE DEFAULT: In the registration process, you are first asked to provide the path to your license file, which Symantec uses to identify you as a valid customer and through which filter delivery is tracked. Symantec Brightmail AntiSpam™...
  • Page 35 For new customers, your license file is an file you acquired via Symantec’s .slf Enterprise Licensing System (ELS) when you purchased Symantec Brightmail AntiSpam. If you choose not to register, you can do so later. Input License File Path ----------------------- Please Enter your License File Path.

  • Page 36: Starting A Brightmail Scanner

    Brightmail Scanner cannot receive new AntiSpam Filters. When you run the Brightmail Control Center and attempt to start an unregistered Brightmail Scanner, Brightmail Scanner remains disabled. If your license key is expired, you will need to obtain an file from your Symantec .slf sales person or from and register after http://www.symantecstore.com/renew...

  • Page 37: What To Do Next

    What to Do Next After successfully installing Brightmail Scanner, only a few additional steps remain to get Symantec Brightmail AntiSpam fully operational. Here is a recommended procedure to finish and test Symantec Brightmail AntiSpam setup for your installation. Configure Sendmail to accommodate the Brightmail Filter as described in “Configuring Sendmail for the Brightmail Filter,”...
  • Page 38 Installing Brightmail Scanner for Sendmail The Uninstaller prints out status messages similar to the following as it removes the Brightmail software: Preparing CONSOLE Mode Installation... =========================================================================== Symantec Brightmail AntiSpam (created with InstallAnywhere by Zero G) --------------------------------------------------------------------------- =========================================================================== About to uninstall... --------------------- This will remove features installed by InstallAnywhere.

  • Page 39: Configuring Sendmail For The Brightmail Filter

    Configuring Sendmail for the Brightmail Filter The Brightmail Client communicates with the Sendmail MTA using the standard Sendmail Mail Filter API. To implement this integration, the Brightmail Client uses the Brightmail Filter ( ), an intermediary program, which connects to Sendmail bmifilter over a socket connection.
  • Page 40 To specify both flags, separate them with a comma followed by a space as shown. For more information on the syntax for this setting, see: http:// www.milter.org/milter_api/installation.html Symantec Brightmail AntiSpam™...

  • Page 41: Configuring Sendmail Switch To Work With Brightmail Scanner

    Configuring Sendmail for the Brightmail Filter Configuring Sendmail Switch to Work with Brightmail Scanner Before completing this procedure, make sure you have followed the instructions in NOTE: “Enable Sendmail External Filtering,” on page To enable Sendmail Switch to work with a Brightmail Scanner: Using the appropriate URL for your environment, open the Sendmail Administrator Console in a Web browser.
  • Page 42 Configuring Sendmail for the Brightmail Filter Configuring Sendmail for the Brightmail Filter Highlight an existing configuration or type a configuration in the text field, and then click load. Symantec Brightmail AntiSpam™...
  • Page 43 Configuring Sendmail for the Brightmail Filter In the menu on the left side, click Expert Configuration. Installation Guide...
  • Page 44 Configuring Sendmail for the Brightmail Filter Configuring Sendmail for the Brightmail Filter In the scrolling list, select INPUT_MAIL_ FILTERS(), and then click view/edit. Symantec Brightmail AntiSpam™...
  • Page 45 Configuring Sendmail for the Brightmail Filter Click add. In the Filter Name field, type bmifilter In the Equates field, specify the filter address and any optional settings. The following example is appropriate in most cases: S=inet:port@machine.xyz.com, T=C:10m;S:1m;R:1m;E:10m “Understanding the Filter Address and Optional Settings,” on page 33 information about the optional failure setting and the timeout setting.

  • Page 46: Configuring Sendmail For Brightmail Scanner With Sendmail.cf

    Configuring Sendmail for the Brightmail Filter Configuring Sendmail for the Brightmail Filter Configuring Sendmail for Brightmail Scanner with sendmail.cf There are two ways to configure Sendmail to work with Symantec Brightmail AntiSpam. You can either edit the file, or you can use to generate a new sendmail.cf...

  • Page 47: Configuring Sendmail For Brightmail Scanner With M4

    # ps -ef | grep sendmail Configuring Sendmail for Brightmail Scanner with M4 There are two ways to configure Sendmail to work with Symantec Brightmail AntiSpam. You can either edit the sendmail.cf file, or you can use m4 to generate a new sendmail.cf file.
  • Page 48 Configuring Sendmail for the Brightmail Filter Configuring Sendmail for the Brightmail Filter Symantec Brightmail AntiSpam™...

  • Page 49: Installing Brightmail Scanner For Windows

    Windows SMTP Service, Exchange 2000, or Exchange 2003 before you install Caution Symantec software. If you are using Exchange 5.5 as your MTA, see the Symantec Brightmail AntiSpam Deployment Planning Guide. Installation Guide...

  • Page 50: Upgrading Software

    Windows SMTP service. • Open port 443 on your firewall for HTTPS communication. For registration and ongoing operations, Symantec Brightmail AntiSpam communicates with the BLOC over a secure connection. Consequently, TCP port 443 must be configured to allow outbound connections.

  • Page 51: Copy The Backup Cert.pem File Into The Etc Directory You Created

    Brightmail Scanner. Because Symantec is now using a different licensing technology for this NOTE: product, to register you must contact your Symantec sales person or go to the following URL: http://www.symantecstore.com/renew Before installing your Brightmail Control Center, upgrade each Brightmail Scanner in your system.

  • Page 52: Installing Brightmail Scanner For Windows

    From the Version 6.0.2 Brightmail Control Center, add the Brightmail Scanners. When your license key expires you will need to register using a license (. ) file. To purchase one, contact your Symantec sales person or go to the following URL: http:// www.symantecstore.com/renew To register after installation: Find and run the Registration Wizard.
  • Page 53 Installing Brightmail Scanner for Windows Click Brightmail Scanner. Click Next. The License screen is displayed. Installation Guide...
  • Page 54 Version 6.0.x installation folder for you and display it at the bottom of the next screen. If you choose Custom, you will be able to change the installation folder. Unless you have uninstalled the prior version, do not change the installation folder. See “Upgrading Software,” on page Symantec Brightmail AntiSpam™...
  • Page 55 Installing Brightmail Scanner for Windows If you see the following error, either you don’t have the Windows SMTP Service installed on this computer or you attempted to install the product on a non-Server version of Windows, such as Windows 2000 Professional. The Windows SMTP Service is part of Exchange 2000 and 2003.
  • Page 56 If you are installing only a Brightmail Client, you will be asked to specify a Brightmail Server. Supply the IP address for the Brightmail Server to which you wish to connect this client. It is not necessary for the Brightmail Server to be already installed. Symantec Brightmail AntiSpam™...
  • Page 57 Installing Brightmail Scanner for Windows When asked for the location of your Brightmail Control Center: — Choose This computer if you are planning on a single machine installation of a Brightmail Scanner and a Brightmail Control Center — Choose Any computer to allow the attachment of any computer as the Control Center for this Brightmail Scanner.
  • Page 58 .slf http:// and register after successful installation. www.symantecstore.com/renew To register Brightmail Scanner: Click Next. Type or browse to (using the button at the right) the path to your Symantec license file ), and then click Next. .slf Symantec Brightmail AntiSpam™...

  • Page 59: Verifying Brightmail Scanner Installation

    Click Exit in the main installation menu, or click the appropriate button to install the spam folder agent of your choice. “Configuring the Spam Folder Agent,” on page 93 “Configuring the Symantec Spam Folder Agent for Domino,” on page Verifying Brightmail Scanner Installation Click Start, point to Settings, click Control Panel, and then double-click Add/ Remove Programs.

  • Page 60: Modifying, Repairing, And Removing Brightmail Scanner

    Select Brightmail Scanner and then click Change. Click Next to skip the introductory dialog box. Click Modify, and then click Next. Click the appropriate icon to expand the list of customization options for a component Modify components if required, and then click Next. Symantec Brightmail AntiSpam™...
  • Page 61 Installing Brightmail Scanner for Windows Indicate where your Brightmail Control Center is and click Next. Click Install. Click Finish. To repair Brightmail Scanner: Click Start, point to Settings, click Control Panel, and then double-click Add or Remove Programs. Select Brightmail Scanner and then click Change. Click Next to skip the introductory dialog box.
  • Page 62 Click Repair, and then click Next. Click Install to reinstall Symantec Brightmail AntiSpam. Click Finish. To remove Brightmail Scanner from your computer: Click Start, point to Programs, click Symantec Brightmail Anti-Spam, and then click Uninstall Brightmail Scanner. Click Yes to confirm uninstallation. Symantec Brightmail AntiSpam™...

  • Page 63: Installing Brightmail Control Center

    Installing Brightmail Control Center The Brightmail Control Center is a Web-based cross-platform configuration and administration center built in Java. Each Symantec Brightmail AntiSpam installation has one Brightmail Control Center, which also houses Brightmail Quarantine and supporting software. You can configure and monitor all of your Brightmail Scanners from the Control Center.

  • Page 64: Software Environment Requirements

    • GNU tar (on Solaris only) Because the tar file names exceed the 40 character file name limit of native Solaris tar, GNU tar is required to install Symantec Brightmail AntiSpam. GNU tar for Solaris is available from http://www.sunfreeware.com other web sites.

  • Page 65: Ldap Compatibility For Brightmail Quarantine

    If your computer already has Netscape 7.1 and you plan to use Netscape 7.1, you NOTE: must download and install a new copy of Netscape 7.1. Symantec Brightmail AntiSpam reports will export correctly only with the latest available copies of Netscape 7.1.

  • Page 66: Checking For Port Availability Via Tcp/Ip

    Brightmail Scanner sends spam email to this port using the SMTP email protocol. 41080 User and administrator Web browsers connect to Symantec software on this port by default. During installation, you can configure the system to use a different port. If you configure the Brightmail Control Center to use a different Web application server than Tomcat, the Web access port will most likely be different.

  • Page 67: Accessing The Unix Install Script

    Do one of the following to navigate to the install script based on whether you are installing from a CD-ROM or a downloaded file: If you are installing from a CD-ROM: a. Insert the CD containing Symantec Brightmail AntiSpam software into the CD- ROM drive. The CD will mount automatically to on Solaris sys- /cdrom/bas_60x tems.

  • Page 68: Running The Installer On Unix

    If you plan to install the Brightmail Control Center in the same directory NOTE: in which Brightmail Quarantine is installed, manually turn off the Tomcat Web Application server. user, run the Installer: root $ su root -c './install' Password: your_root_password Symantec Brightmail AntiSpam™...
  • Page 69 Introduction ------------ The Installer will guide you through the installation of Brightmail Control Center, part of Symantec Brightmail AntiSpam. Respond to each prompt to proceed to the next step in the installation. If you want to change something on a previous step, type 'back'.
  • Page 70 Choose Install Folder --------------------- Where would you like to install the Brightmail Control Center? Default Install Folder: /opt/symantec/sbas/ControlCenter ENTER AN ABSOLUTE PATH, OR PRESS <ENTER> TO ACCEPT THE DEFAULT Choose the installation directory—the path to the Brightmail Control Center files. To accept the recommended path, press Enter.
  • Page 71 ------------------------ Please Review the Following Before Continuing: Product Name: Brightmail Control Center Install Folder: /opt/symantec/sbas/ControlCenter Application Server: Tomcat PRESS <ENTER> TO CONTINUE: Press Enter to continue based on these settings. Before proceeding to installation, the Installer checks to see if Brightmail Quarantine exists on the machine on which you are currently installing Brightmail Control Center.
  • Page 72 --------------------- The Brightmail Control Center installation has been completed. You chose to install your own Web Application Server, see the Symantec Brightmail AntiSpam Installation Guide for instructions. Click 'Exit' to exit the installer. PRESS <ENTER> TO EXIT THE INSTALLER: For additional information on accessing the Brightmail Control Center, see “Logging in...

  • Page 73: Reinstalling Control Center On Unix

    Do one of the following to navigate to the Setup.exe file: If you are installing from a CD-ROM: Insert the Symantec Brightmail AntiSpam software distribution CD-ROM in your computer’s CD-ROM drive. If the Installer does not run automatically, open the Windows folder on the CD using Windows Explorer and double-click the Setup.exe icon.
  • Page 74 Installing Brightmail Control Center Installing Brightmail Control Center Click Next. After reading the license agreement, click I accept the Terms of the License Agreement and then Next. Symantec Brightmail AntiSpam™...
  • Page 75 Installing Brightmail Control Center Click Next to choose the default folder for the Brightmail Control Center or click Choose... to select a different folder for Control Center. If you are upgrading from Version 6.0.0 or 6.0.1, you will not see NOTE: the screen above, as well as some of the following screens.
  • Page 76 Control Center. For information on using your own Web application server, refer “Configuring the Brightmail Control Center to Use WebLogic,” on page The Installer configures Tomcat with a self-signed SSL certificate on a NOTE: secondary port, using https://localhost:41443/brightmail Symantec Brightmail AntiSpam™...
  • Page 77 If you choose to install MySQL in an alternate location, please be aware of the NOTE: following: Symantec does not recommend that you install MySQL on a networked drive as it will impact performance of the Brightmail Control Center. If you choose to do this, you must also perform some post installation configuration to allow services to run on networked drives.
  • Page 78 Installing Brightmail Control Center Installing Brightmail Control Center When you are ready, click Install to proceed. The installation occurs, and when it is done the following displays: Click Done. Click Exit to quit from the Brightmail Control Center Installer. Symantec Brightmail AntiSpam™...

  • Page 79: Automatic Startup Configured By Brightmail Control Center Installer

    The Uninstaller removes the MySQL and Tomcat services if they exist, and then uninstalls the Brightmail Control Center files and also the MySQL and Tomcat files if they exist. Click Start, point to Programs, point to Symantec Brightmail AntiSpam, and then click Uninstall Brightmail Control Center.
  • Page 80 Type Y and press Enter. MySQL and Tomcat are removed, then the Brightmail Control Center Uninstall screen opens in a separate window. Click Uninstall to start the uninstallation process. The Install Complete page displays. The page may list some files that it could not remove. Symantec Brightmail AntiSpam™...

  • Page 81: Control Center Testing And Configuration

    The following major topics are included: Testing Installation of the Brightmail Control Center • Adding a Brightmail Scanner • Testing Symantec Brightmail AntiSpam Filtering • Configuring the Brightmail Control Center to Use WebLogic • Installation Guide...

  • Page 82: Testing Installation Of The Brightmail Control Center

    Testing Installation of the Brightmail Control Center The following sections describe how to verify that the Brightmail Control Center is installed correctly and test basic functions of Symantec Brightmail AntiSpam. You can perform the following procedures regardless of any LDAP requirements you may have for Quarantine.

  • Page 83: Adding A Brightmail Scanner

    Control Center Testing and Configuration To check the versions of your installed software: go to http://localhost:port/brightmail/BrightmailVersion where is the port that Tomcat uses, typically port 41080 You can see the installed versions of the following software: — Brightmail Control Center or Brightmail Quarantine —...

  • Page 84: Starting A Brightmail Scanner From The Brightmail Control Center

    The following steps can be used after you have initially installed and tested your installation of Symantec Brightmail AntiSpam. If you are still in the installation and testing process, be sure you have started a Brightmail Scanner as described in “Starting a...

  • Page 85: Verifying Spam Filtering

    Check the mailbox for the test account to verify receipt of the test message with the added Cleaner message text. Verifying Spam Filtering to Quarantine If you’ve configured Symantec Brightmail AntiSpam to forward spam messages to Quarantine as described below and both the Brightmail Control Center and at least one Installation Guide...
  • Page 86 The Brightmail Scanner must be configured to forward spam messages to Quarantine. If the default configuration is not changed, Symantec Brightmail AntiSpam inserts [Spam] in the subject line of spam messages and delivers them to users’ normal inbox rather than Quarantine.

  • Page 87: Configuring The Brightmail Control Center To Use Weblogic

    UNIX: /opt/symantec/sbas/ControlCenter/brightmail Windows: C:\Program Files\Symantec\SBAS\ControlCenter\brightmail Copy the file to an mysql-connector-java-com-3.0.11-stable-bin.jar appropriate directory on the computer where WebLogic is installed. Copy the file to a directory in your CLASSPATH. Adding MySQL Connector/J to the CLASSPATH Variable...

  • Page 88: Configuring The Brightmail Jdbc Connection Pool

    Select JDBC Connection Pools page in the WebLogic Server console by navigating /Services/JDBC/Connection Pools. your-domain Select Configure a new JDBC Connection Pool… In the Database Type list, click MySQL. Select the MySQL’s Driver (Type4) Versions:Any. The page should appear similar to the following. Click Continue. Symantec Brightmail AntiSpam™...
  • Page 89 Control Center Testing and Configuration In the Name box, type a name, for example Brightmail Connection Pool In the Database Name box, type brightmail In the Host Name box, type the database server’s name or IP address. In the Port box, type the port for the database server. In the Database User Name box, type brightmailuser In the Password box, type...
  • Page 90 The hostname and port number shown in italics will be the values you specified in Steps 8 and 9. The page should appear similar to the picture above. Click Test Driver Configuration. Click Create and deploy. Symantec Brightmail AntiSpam™...

  • Page 91: Configuring A Data Source

    Control Center Testing and Configuration Configuring a Data Source Select the JDBC Data Sources page in the WebLogic management console by navigating to /Services/JDBC/Data Sources. your-domain Click Configure a new JDBC Data Source. In the Name box, type a name for your Data Source, for example Brightmail Data Source In the JNDI Name box, type...

  • Page 92: Deploying The Brightmail.war

    Testing the Control Center with the WebLogic Application Server After following the steps in this section, ensure that the Brightmail Control Center and MySQL are communicating successfully by attempting to log into the Brightmail Control Center as described in the Symantec Brightmail AntiSpam Administration Guide. Symantec Brightmail AntiSpam™...

  • Page 93: Plug-Ins And Foldering

    Plug-Ins and Foldering This section tells you how to install and configure the Symantec plug-in for Outlook and spam foldering agents for Microsoft Exchange and Lotus Domino users. It contains the following topics: Installing the Symantec Plug-in for Outlook •...

  • Page 94: End User Experience

    This is Spam – Users click this button to submit the message to the BLOC and move it from their Inbox to their Spam folder. • This is Not Spam – Users click this button to submit the message to Symantec and move it from their Spam folder to their Inbox. •...

  • Page 95: Software Requirements

    Administrator Setup Instructions To set up the Symantec Plug-in for Outlook: Do one of the following to navigate to the folder containing the Symantec Plug-in for Outlook software: If you are installing from a CD-ROM: a. Insert the Symantec Brightmail AntiSpam software distribution CD-ROM in your computer’s CD-ROM drive.
  • Page 96 Open the file for editing. This file contains the initial settings for setup.ini launching the Symantec Plug-in for Outlook installation package. All the settings you need to use can be set on the attribute in the [Startup] section at the...
  • Page 97 Plug-Ins and Foldering Table 9. Symantec Plug-in for Outlook Setup Variables (Continued) Variable Name Description AUTO_ADD_ALLOWED If set to 1 (the default) or any non-zero value, automatically generate the Allowed Senders list. If set to 0, do not automatically generate the Allowed...
  • Page 98 Plug-Ins and Foldering Plug-Ins and Foldering Table 9. Symantec Plug-in for Outlook Setup Variables (Continued) Variable Name Description EMPTY_SPAM_FOLDER If set to 0 (the default), do not display the Empty Spam button. If set to 1 or any non-zero value, display the Empty Spam button.

  • Page 99: Configuring Automatic Spam Foldering

    Save your changes to the file. setup.ini These settings will be used during each installation of the Symantec Plug-in for Outlook to modify the Windows Registry on each user’s computer. Configuring Automatic Spam Foldering You can route users’ spam into a special email folder so they can review it using the Spam Folder Agent or the Symantec Spam Folder Agent for Domino.
  • Page 100 Under Service Account, specify an account to be used by the Spam Folder Agent. Type the Active Directory or NT Domain, as well as the user name and password. For instructions on creating the service account for Exchange, see the Symantec Brightmail AntiSpam Deployment Planning Guide.

  • Page 101: Configuring The Symantec Spam Folder Agent For Domino

    105. Configuring the Symantec Spam Folder Agent for Domino To enable automatic foldering of spam for your Lotus Domino users, install the Symantec Spam Folder Agent for Domino on each Lotus Domino mail server. Before you install the Symantec Spam Folder Agent for Domino, ensure your computer meets the following software and configuration requirements: •...
  • Page 102 1) Start Lotus Notes. 2) Click File, then click Database, and then click Open. 3) In your Local directory, select Brightmail Domino Agent (BASAdmin.NSF). 4) Click Open. Follow the displayed instructions. Click Install Brightmail Domino Agent, and then click Next. Symantec Brightmail AntiSpam™...
  • Page 103 Plug-Ins and Foldering After reading the license agreement, click I accept the terms of the license agreement, and then click Next. Installation Guide...
  • Page 104 You should then restart each server running Release 5. (This setting is not required for servers running Release 6.) For more information, search for document #1099178 on the Lotus support page: http://www-3.ibm.com/software/lotus/support/ Click Next. Select the option(s) you wish to configure. Click Next. Symantec Brightmail AntiSpam™...
  • Page 105 Plug-Ins and Foldering This screen is displayed only if you chose to configure spam foldering. NOTE: Under Spam Folder, specify the name of the folder in each end user’s mailbox where spam will be sidelined, and then click Next. The default is Spam. Specify a spam expiration between 1 and 365 days.
  • Page 106 Under Submission Types, select Missed Spam, False Positives, or both. Under Local Administrator Email for Submissions, either select an email address from the drop down list adjacent the submission type(s) you wish to configure or type the address. Click Next. Symantec Brightmail AntiSpam™...
  • Page 107 If your mail template files are replicas (as they are when shipped), you need NOTE: only install the Symantec Spam Folder Agent for Domino on one server. Specify a mail template filename. You must repeat this process for each mail template used at your site.
  • Page 108 Design task, which runs overnight. The Symantec Spam Folder Agent for Domino will not be visible on each user’s mail file until: • Replication distributes the change to the template on the user’s home mail server.
  • Page 109 Help Using document of the mail BMIEndUser.doc template so that users have it available at all times. To uninstall the Symantec Spam Folder Agent for Domino: Click Brightmail Domino Agent in the Installer screen. Click Uninstall Brightmail Domino Agent, and then click Next.
  • Page 110 Plug-Ins and Foldering Plug-Ins and Foldering Click Uninstall. If your mail template files are replicas (as they are when shipped), you need NOTE: only uninstall once. Symantec Brightmail AntiSpam™...

  • Page 111: Enabling Automatic Spam Foldering

    Plug-Ins and Foldering Click Finish. Enabling Automatic Spam Foldering Follow these steps to enable automatic spam foldering for Exchange 5.5 or 2000, Exchange 2003, or Lotus Domino. In the Brightmail Control Center, click on the Settings tab. Choose Group Policies in the menu in the left pane.
  • Page 112 Plug-Ins and Foldering Plug-Ins and Foldering Symantec Brightmail AntiSpam™...

  • Page 113: Appendix A: Symantec Brightmail Antispam Files

    An asterisk ( ) designates an executable file. In all of the following, the jre directory, which is installed by InstallAnywhere and which Symantec does not control, is not listed. Directory listings assume "pwd" is the installation directory.

  • Page 114: Brightmail Scanner On Unix

    Appendix A: Symantec Brightmail AntiSpam Files Brightmail Scanner on UNIX Brightmail Scanner, Complete (Brightmail Server, Brightmail Client) -rw-rw-r-- 1 root root Brightmail_Anti-Spam_InstallLog.log -r--r--r-- 1 mailwall bmi EULA -rw-r--r-- 1 mailwall bmi LEGAL.NOTICES.txt drwxrwxr-x 2 root root UninstallerData/ drwxr-x--- 2 mailwall bmi...
  • Page 115 Appendix A: Symantec Brightmail AntiSpam Files ./bm_ruleset.2.avsym.1: -rw-rw---- 1 mailwall bmi catalog.dat -rw-rw---- 1 mailwall bmi navensol.so -rw-rw---- 1 mailwall bmi navexsol.so -rw-rw---- 1 mailwall bmi navupsol.dis -rw-rw---- 1 mailwall bmi ncsacert.txt -rw-rw---- 1 mailwall bmi scrauth.dat -rw-rw---- 1 mailwall bmi technote.txt...
  • Page 116 Appendix A: Symantec Brightmail AntiSpam Files ./etc: -r--r----- 1 mailwall bmi AdvisoryStore.dtd -rw-rw---- 1 mailwall bmi Notification.xml -r--r--r-- 1 mailwall bmi agent.cert -rw-rw-r-- 1 mailwall bmi agentconfig.xml -r--r--r-- 1 mailwall bmi agent.key drwxrwxr-x 2 mailwall bmi bm_ruleset.2.avsym.1.sample/ -rw-rw-r-- 1 mailwall bmi bmiconfig.xml...
  • Page 117 Appendix A: Symantec Brightmail AntiSpam Files -rw-rw---- 1 mailwall bmi virscan2.dat -rw-rw---- 1 mailwall bmi virscan3.dat -rw-rw---- 1 mailwall bmi virscan4.dat -rw-rw---- 1 mailwall bmi virscan5.dat -rw-rw---- 1 mailwall bmi virscan6.dat -rw-rw---- 1 mailwall bmi virscan7.dat -rw-rw---- 1 mailwall bmi virscan8.dat...
  • Page 118 Appendix A: Symantec Brightmail AntiSpam Files ./jobs/bmagent: ./jobs/bmifilter: -rw-r----- 2 mailwall bmi bmifilter.stop ./jobs/bmserver: -rw-r----- 2 mailwall bmi bmserver.stop ./jobs/conduit: -rw-r----- 2 mailwall bmi conduit.stop ./jobs/harvester: -rw-r----- 2 mailwall bmi harvester.stop ./lib: -rwxr-xr-x 1 mailwall bmi libACE.so.5.4.0* lrwxrwxrwx 1 root root libACE.so ->...

  • Page 119: Brightmail Scanner Installation With Brightmail Server Only

    Appendix A: Symantec Brightmail AntiSpam Files ./sbin: -r-xr-x--- 1 mailwall bmi bmagent* -r-xr-x--- 1 mailwall bmi controller.sh* -r-xr-x--- 1 mailwall bmi inspector* -r-xr-x--- 1 mailwall bmi register* -r-xr-x--- 1 mailwall bmi register.sh* -r-xr-x--- 1 mailwall bmi runcleaner.sh* -r-xr-x--- 1 mailwall bmi runner* ./stats:...
  • Page 120 Appendix A: Symantec Brightmail AntiSpam Files -rw-rw-r-- 1 root root uninstaller.jar ./bin: -r-xr-x--- 1 mailwall bmi av_cleaner* -r-xr-x--- 1 mailwall bmi bmserver* -r-xr-x--- 1 mailwall bmi conduit* -r-xr-x--- 1 mailwall bmi harvester* -r-xr-x--- 1 mailwall bmi kicker* ./bm_ruleset.2.avsym.1: -rw-rw---- 1 mailwall bmi catalog.dat...
  • Page 121 Appendix A: Symantec Brightmail AntiSpam Files ./bm_ruleset.2.spamhunter_rules.1: -rw-rw---- 1 mailwall bmi rules ./bm_ruleset.2.spamsig_rules.1: -rw-rw---- 1 mailwall bmi spamsigs ./docs: -rw-r--r-- 1 mailwall bmi documentation.html ./etc: -r--r----- 1 mailwall bmi AdvisoryStore.dtd -rw-rw---- 1 mailwall bmi Notification.xml -r--r--r-- 1 mailwall bmi agent.cert...
  • Page 122 Appendix A: Symantec Brightmail AntiSpam Files -rw-rw---- 1 mailwall bmi tinf.dat -rw-rw---- 1 mailwall bmi tinfidx.dat -rw-rw---- 1 mailwall bmi tinfl.dat -rw-rw---- 1 mailwall bmi tscan1.dat -rw-rw---- 1 mailwall bmi tscan1hd.dat -rw-rw---- 1 mailwall bmi update.txt -rw-rw---- 1 mailwall bmi virscan.inf...
  • Page 123 Appendix A: Symantec Brightmail AntiSpam Files ./jobs: drwxr-x--- 2 mailwall bmi bmagent/ drwxr-x--- 2 mailwall bmi bmserver/ drwxr-x--- 2 mailwall bmi conduit/ drwxr-x--- 2 mailwall bmi harvester/ ./jobs/bmagent: ./jobs/bmserver: -rw-r----- 2 mailwall bmi bmserver.stop ./jobs/conduit: -rw-r----- 2 mailwall bmi conduit.stop ./jobs/harvester:...

  • Page 124: Brightmail Scanner Installation With Brightmail Client Only

    Appendix A: Symantec Brightmail AntiSpam Files -rwxr-xr-x 1 mailwall bmi libxml2.so.2* lrwxrwxrwx 1 root root libxml2.so -> ./libxml2.so.2* ./logs: -rw-rw-r-- 1 mailwall bmi common_log ./stats: -r-xr-x--- 1 mailwall bmi bmagent* -r-xr-x--- 1 mailwall bmi controller.sh* -r-xr-x--- 1 mailwall bmi inspector*...
  • Page 125 Appendix A: Symantec Brightmail AntiSpam Files ./bin: -rwxr-x--- 1 mailwall bmi bmifilter* ./docs: -rw-r--r-- 1 mailwall bmi documentation.html ./etc: -r--r--r-- 1 mailwall bmi agent.cert -rw-rw-r-- 1 mailwall bmi agentconfig.xml -r--r--r-- 1 mailwall bmi agent.key -rw-rw-r-- 1 mailwall bmi bmiconfig.xml -rwxrwxr-x...

  • Page 126: Brightmail Scanner On Windows

    Appendix A: Symantec Brightmail AntiSpam Files -r-xr-x--- 1 mailwall bmi controller.sh* -r-xr-x--- 1 mailwall bmi inspector* -r-xr-x--- 1 mailwall bmi runner* Brightmail Scanner on Windows Brightmail Scanner, Complete (Brightmail Server, Brightmail Client) C:\Program Files\Symantec\SBAS\Scanner <DIR> <DIR> bmispool <DIR> bm_ruleset.2.avsym.1 <DIR>...
  • Page 127 Appendix A: Symantec Brightmail AntiSpam Files Dec2ARJ.dll Dec2AS.dll Dec2CAB.dll Dec2EXE.dll Dec2GHO.dll Dec2GZIP.dll Dec2HQX.dll Dec2HTTP.dll Dec2ID.dll Dec2LHA.dll Dec2LZ.dll Dec2MB3.dll Dec2MIME.dll Dec2OLE1.dll Dec2RAR.dll Dec2RTF.dll Dec2SS.dll Dec2TAR.dll Dec2Text.dll Dec2TNEF.dll Dec2UUE.dll Dec2Zip.dll DecSDK.dll harvester.exe icudt28l.dll icuin28.dll icuuc28.dll kicker.exe libantivirus.dll libbh.dll liblanguageid.dll libpermit.dll libregexfilter.dll libreinsert.dll libsieve.dll...
  • Page 128 Appendix A: Symantec Brightmail AntiSpam Files libxml2.dll Navapi32.dll Rec2.dll regwizard.exe stlport_vc646.dll xerces-c_2_3_0.dll C:\Program Files\Symantec\SBAS\Scanner\bmispool <DIR> spam <DIR> virus C:\Program Files\Symantec\SBAS\Scanner\bmispool\spam <DIR> Badmail C:\Program Files\Symantec\SBAS\Scanner\bmispool\spam\Badmail C:\Program Files\Symantec\SBAS\Scanner\bmispool\virus C:\Program Files\Symantec\SBAS\Scanner\bm_ruleset.2.avsym.1 CATALOG.DAT FW15.DIS IDUPGRAD.EXE NAV40I.DIS NAVENG.EXP NAVENG.SYS NAVENG.VXD NAVENG32.DLL NAVEX15.EXP NAVEX15.SYS NAVEX15.VXD NAVEX32A.DLL NCSACERT.TXT...
  • Page 129 Appendix A: Symantec Brightmail AntiSpam Files TSCAN1HD.DAT VIRSCAN.INF VIRSCAN1.DAT VIRSCAN2.DAT VIRSCAN3.DAT VIRSCAN4.DAT VIRSCAN5.DAT VIRSCAN6.DAT VIRSCAN7.DAT VIRSCAN8.DAT VIRSCAN9.DAT WHATSNEW.TXT ZDONE.DAT C:\Program Files\Symantec\SBAS\Scanner\bm_ruleset.2.permit_rules.1 permit_rules C:\Program Files\Symantec\SBAS\Scanner\bm_ruleset.2.spamhunter_rules.1 rules C:\Program Files\Symantec\SBAS\Scanner\bm_ruleset.2.spamsig_rules.1 spamsigs C:\Program Files\Symantec\SBAS\Scanner\Config agentconfig.xml bmiconfig.xml sieve_script.txt allowedblockedlist.txt C:\Program Files\Symantec\SBAS\Scanner\Documentation documentation.html C:\Program Files\Symantec\SBAS\Scanner\etc AdvisoryStore.dtd agent.cert...
  • Page 130 Appendix A: Symantec Brightmail AntiSpam Files BrightmailServer.H BrightmailServer.ini cert.pem EULA.rtf hashes.sample <DIR> tests LEGAL.NOTICES.txt Notification.xml rules.sample sieve_adult.txt sieve_script.sample.txt spamsigs.sample trusted.cert C:\Program Files\Symantec\SBAS\Scanner\etc\tests <DIR> lang_id rules.msg sieve.adult.msg sieve.sideline.msg spamsig.msg C:\Program Files\Symantec\SBAS\Scanner\etc\tests\lang_id de.eml es.eml fr.eml it.eml ja.eml ko.eml nl.eml pt.eml ru.eml zh.eml C:\Program Files\Symantec\SBAS\Scanner\Jobs <DIR>...
  • Page 131 Appendix A: Symantec Brightmail AntiSpam Files C:\Program Files\Symantec\SBAS\Scanner\Jobs\Bmserver C:\Program Files\Symantec\SBAS\Scanner\Logs C:\Program Files\Symantec\SBAS\Scanner\Spam C:\Program Files\Symantec\SBAS\Scanner\Stats Registry keys installed: <*** ALL ***> [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application\Brightmail] "EventMessageFile"="[INSTALLDIR]\Bin\bmiEventLog.dll" "TypesSupported"=dword:00000007 "CategoryMessageFile"="[INSTALLDIR]\Bin\bmiEventLog.dll" "CategoryCount"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Brightmail] "RTF"=dword:[BmiRuntimeFlags] "ConfigFile"="[INSTALLDIR]\Config\bmiconfig.xml" "LoadPoint"="[INSTALLDIR]" <*** SERVER ***> [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application\Bright- mailServer] "EventMessageFile"="[INSTALLDIR]\bin\bmiPerf.dll" "TypesSupported"=dword:00000007 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application\BrightmailMod- ules] "EventMessageFile"="[INSTALLDIR]\bin\bmiPerf.dll" "TypesSupported"=dword:00000007...
  • Page 132 Appendix A: Symantec Brightmail AntiSpam Files "Close"="CloseData_Server" "Disable Performance Counters"=dword:00000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BrightmailModules] [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BrightmailModules\Performance] "Library"="[INSTALLDIR]\bin\bmiPerf.dll" "Open"="OpenData_Modules" "Collect"="CollectData_Modules" "Close"="CloseData_Modules" "Disable Performance Counters"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Brightmail\Cleaner] "Cleaner_interval"=dword:00000014 <*** CLIENT ***> [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application\BrightmailCli- ent] "EventMessageFile"="[INSTALLDIR]\bin\bmiPerf.dll" "TypesSupported"=dword:00000007 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BrightmailClient] [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BrightmailClient\Performance] "Library"="[INSTALLDIR]\bin\bmiPerf.dll" "Open"="OpenData_Client" "Collect"="CollectData_Client" "Close"="CloseData_Client" "Disable Performance Counters"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Brightmail\Sink] "Thread_count"=dword:00000032 "Enabled"=dword:00000000 "Prop_GUID"="{23AA8321-27C4-4f24-B321-799A1B2A9E74}"...

  • Page 133: Brightmail Scanner Installation With Brightmail Server Only

    Appendix A: Symantec Brightmail AntiSpam Files Brightmail Scanner Installation with Brightmail Server Only C:\Program Files\Symantec\SBAS\Scanner <DIR> <DIR> BmiSpool <DIR> bm_ruleset.2.avsym.1 <DIR> bm_ruleset.2.permit_rules.1 <DIR> bm_ruleset.2.spamhunter_rules.1 <DIR> bm_ruleset.2.spamsig_rules.1 <DIR> Config <DIR> Documentation <DIR> <DIR> Jobs <DIR> Logs <DIR> Spam <DIR> Stats C:\Program Files\Symantec\SBAS\Scanner\Bin ace.dll...
  • Page 134 Appendix A: Symantec Brightmail AntiSpam Files Dec2ID.dll Dec2LHA.dll Dec2LZ.dll Dec2MB3.dll Dec2MIME.dll Dec2OLE1.dll Dec2RAR.dll Dec2RTF.dll Dec2SS.dll Dec2TAR.dll Dec2Text.dll Dec2TNEF.dll Dec2UUE.dll Dec2Zip.dll DecSDK.dll harvester.exe icudt28l.dll icuin28.dll icuuc28.dll kicker.exe libantivirus.dll libbh.dll liblanguageid.dll libpermit.dll libregexfilter.dll libreinsert.dll libsieve.dll libspamhunter.dll libspamsig.dll libxml2.dll Navapi32.dll Rec2.dll regwizard.exe stlport_vc646.dll xerces-c_2_3_0.dll...
  • Page 135 Appendix A: Symantec Brightmail AntiSpam Files <DIR> Virus C:\Program Files\Symantec\SBAS\Scanner\BmiSpool\Spam <DIR> Badmail C:\Program Files\Symantec\SBAS\Scanner\BmiSpool\Virus C:\Program Files\Symantec\SBAS\Scanner\bm_ruleset.2.avsym.1 CATALOG.DAT FW15.DIS IDUPGRAD.EXE NAV40I.DIS NAVENG.EXP NAVENG.SYS NAVENG.VXD NAVENG32.DLL NAVEX15.EXP NAVEX15.SYS NAVEX15.VXD NAVEX32A.DLL NCSACERT.TXT SCRAUTH.DAT SYMAVENG.CAT SYMAVENG.INF TECHNOTE.TXT TINF.DAT TINFIDX.DAT TINFL.DAT TSCAN1.DAT TSCAN1HD.DAT VIRSCAN.INF VIRSCAN1.DAT VIRSCAN2.DAT...
  • Page 136 Appendix A: Symantec Brightmail AntiSpam Files VIRSCAN9.DAT WHATSNEW.TXT ZDONE.DAT C:\Program Files\Symantec\SBAS\Scanner\bm_ruleset.2.permit_rules.1 permit_rules C:\Program Files\Symantec\SBAS\Scanner\bm_ruleset.2.spamhunter_rules.1 rules C:\Program Files\Symantec\SBAS\Scanner\bm_ruleset.2.spamsig_rules.1 spamsigs C:\Program Files\Symantec\SBAS\Scanner\Config agentconfig.xml bmiconfig.xml sieve_script.txt allowedblockedlist.txt C:\Program Files\Symantec\SBAS\Scanner\Documentation documentation.html C:\Program Files\Symantec\SBAS\Scanner\etc AdvisoryStore.dtd agent.cert agent.key BrightmailModules.H BrightmailModules.ini BrightmailServer.H BrightmailServer.ini EULA.rtf hashes.sample LEGAL.NOTICES.txt Notification.xml rules.sample...
  • Page 137 Appendix A: Symantec Brightmail AntiSpam Files C:\Program Files\Symantec\SBAS\Scanner\etc\tests <DIR> langid rules.msg sieve.adult.msg sieve.sideline.msg spamsig.msg C:\Program Files\Symantec\SBAS\Scanner\etc\tests\langid de.eml es.eml fr.eml it.eml ja.eml ko.eml nl.eml pt.eml ru.eml zh.eml C:\Program Files\Symantec\SBAS\Scanner\Jobs <DIR> Bmserver C:\Program Files\Symantec\SBAS\Scanner\Jobs\Bmserver C:\Program Files\Symantec\SBAS\Scanner\Logs C:\Program Files\Symantec\SBAS\Scanner\Spam C:\Program Files\Symantec\SBAS\Scanner\Stats Registry keys installed: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application\Brightmail] "EventMessageFile"="[INSTALLDIR]\Bin\bmiEventLog.dll"...

  • Page 138: Brightmail Scanner Installation With Brightmail Client Only

    Appendix A: Symantec Brightmail AntiSpam Files [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application\Bright- mailServer] "EventMessageFile"="[INSTALLDIR]\bin\bmiPerf.dll" "TypesSupported"=dword:00000007 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application\BrightmailMod- ules] "EventMessageFile"="[INSTALLDIR]\bin\bmiPerf.dll" "TypesSupported"=dword:00000007 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BrightmailServer] [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BrightmailServer\Performance] "Library"="[INSTALLDIR]\bin\bmiPerf.dll" "Open"="OpenData_Server" "Collect"="CollectData_Server" "Close"="CloseData_Server" "Disable Performance Counters"=dword:00000000 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BrightmailModules] [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BrightmailModules\Performance] "Library"="[INSTALLDIR]\bin\bmiPerf.dll" "Open"="OpenData_Modules" "Collect"="CollectData_Modules" "Close"="CloseData_Modules" "Disable Performance Counters"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Brightmail\Cleaner] "Cleaner_interval"=dword:00000014 Brightmail Scanner Installation with Brightmail Client Only C:\Program Files\Symantec\SBAS\Scanner <DIR>...
  • Page 139 Appendix A: Symantec Brightmail AntiSpam Files <DIR> Logs C:\Program Files\Symantec\SBAS\Scanner\Bin ace.dll ACE_SSL.dll bmagent.exe bmiEventLog.dll bmiperf.dll bmishareddata.dll bmiSink52.dll libxml2.dll stlport_vc646.dll C:\Program Files\Symantec\SBAS\Scanner\Config agentconfig.xml bmiconfig.xml C:\Program Files\Symantec\SBAS\Scanner\Documentation documentation.html C:\Program Files\Symantec\SBAS\Scanner\etc agent.cert agent.key BrightmailClient.H BrightmailClient.ini EULA.rtf LEGAL.NOTICES.txt C:\Program Files\Symantec\SBAS\Scanner\Logs Registry keys installed: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application\Brightmail] "EventMessageFile"="[INSTALLDIR]\Bin\bmiEventLog.dll"...

  • Page 140: Brightmail Control Center On All Platforms

    Appendix A: Symantec Brightmail AntiSpam Files "LoadPoint"="[INSTALLDIR]" [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application\BrightmailCli- ent] "EventMessageFile"="[INSTALLDIR]\bin\bmiPerf.dll" "TypesSupported"=dword:00000007 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BrightmailClient] [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BrightmailClient\Performance] "Library"="[INSTALLDIR]\bin\bmiPerf.dll" "Open"="OpenData_Client" "Collect"="CollectData_Client" "Close"="CloseData_Client" "Disable Performance Counters"=dword:00000000 [HKEY_LOCAL_MACHINE\SOFTWARE\Brightmail\Sink] "Thread_count"=dword:00000032 "Enabled"=dword:00000000 "Prop_GUID"="{23AA8321-27C4-4f24-B321-799A1B2A9E74}" "Reload"=dword:00000000 "SMTPServerInstance"=dword:[SMTPVIRTSVR] Brightmail Control Center on All Platforms -rw-rw-r-- 1 root root BrightmailLog.log -rw-rw-r-- 1 root root Brightmail_Control_Center_InstallLog.log...
  • Page 141 Appendix A: Symantec Brightmail AntiSpam Files ./MySQL: drwxr-xr-x 14 root mysql mysql-pro-4.0.16-sun-solaris2.8-sparc -rwxrwxr-x 1 root root mysql-pro-4.0.16-sun-solaris2.8-sparc.tar ./MySQL/mysql-pro-4.0.16-sun-solaris2.8-sparc: -rw-r--r-- 1 root mysql COPYING -rw-r--r-- 1 root mysql COPYING.LIB -rw-r--r-- 1 root mysql INSTALL-BINARY -rw-r--r-- 1 root mysql MySQLEULA.txt drwxr-xr-x 2 root...
  • Page 142 Appendix A: Symantec Brightmail AntiSpam Files -rwxr-xr-x 1 root mysql mysql_explain_log -rwxr-xr-x 1 root mysql mysql_find_rows -rwxr-xr-x 1 root mysql mysql_fix_extensions -rwxr-xr-x 1 root mysql mysql_fix_privilege_tab -rwxr-xr-x 1 root mysql mysql_secure_installati -rwxr-xr-x 1 root mysql mysql_setpermission -rwxr-xr-x 1 root mysql mysql_tableinfo...
  • Page 143 Appendix A: Symantec Brightmail AntiSpam Files -rw-rw---- 1 mysql mysql ib_arch_log_0000000000 -rw-rw---- 1 mysql mysql ib_logfile0 -rw-rw---- 1 mysql mysql ib_logfile1 -rw-rw---- 1 mysql mysql ibdata1 -rwxrwxr-x 1 mysql mysql my.cnf drwxr-x--- 2 mysql mysql mysql -rw-rw---- 1 mysql root host.err...
  • Page 144 Appendix A: Symantec Brightmail AntiSpam Files -rw-r--r-- 1 root mysql mysql.info ql-pro-4.0.16-sun-solaris2.8-sparc/lib: -rw-r--r-- 1 root mysql libdbug.a -rw-r--r-- 1 root mysql libmygcc.a -rw-r--r-- 1 root mysql libmysqlclient.a -rw-r--r-- 1 root mysql libmysqlclient_r.a -rw-r--r-- 1 root mysql libmysqld.a -rw-r--r-- 1 root mysql libmystrings.a...
  • Page 145 Appendix A: Symantec Brightmail AntiSpam Files ./Tomcat: drwxr-xr-x 11 root root jakarta-tomcat-4.1.27 -rwxrwxr-x 1 root root tomcat-4.1.27.zip ./Tomcat/jakarta-tomcat-4.1.27: -rw-r--r-- 1 root root LICENSE -rw-r--r-- 1 root root README.txt -rw-r--r-- 1 root root RELEASE-NOTES-4.1.txt -rw-r--r-- 1 root root RELEASE-PLAN-4.1.txt -rw-r--r-- 1 root root RUNNING.txt...
  • Page 146 Appendix A: Symantec Brightmail AntiSpam Files -rwxr-xr-x 1 root root shutdown.sh -rw-r--r-- 1 root root startup.bat -rwxr-xr-x 1 root root startup.sh -rw-r--r-- 1 root root tomcat-jni.jar -rw-r--r-- 1 root root tomcat.exe -rw-r--r-- 1 root root tool-wrapper.bat -rwxr-xr-x 1 root root tool-wrapper.sh...
  • Page 147 Appendix A: Symantec Brightmail AntiSpam Files -rw-r--r-- 1 root root servlet.jar ./Tomcat/jakarta-tomcat-4.1.27/conf: -rw-r--r-- 1 root root catalina.policy -rw-r--r-- 1 root root jk2.properties -rw-r--r-- 1 root root server-noexamples.xml.config -rwxrwxr-x 1 root root server.xml -rw-rw-r-- 1 root root tomcat-users.xml -rw-r--r-- 1 root root web.xml...
  • Page 148 Appendix A: Symantec Brightmail AntiSpam Files -rw-r--r-- 1 root root servlets-common.jar -rw-r--r-- 1 root root servlets-default.jar -rw-r--r-- 1 root root servlets-invoker.jar -rw-r--r-- 1 root root servlets-manager.jar -rw-r--r-- 1 root root servlets-ssi.renametojar -rw-r--r-- 1 root root servlets-webdav.jar -rw-r--r-- 1 root root tomcat-coyote.jar...
  • Page 149 Appendix A: Symantec Brightmail AntiSpam Files ./UninstallerData: -rw-rw-r-- 1 root root InstallScript.iap_xml -rwxr-xr-x 1 root root Uninstall_Brightmail_Control_Center -rwxrwxr-x 1 root root Uninstall_Brightmail_Control_Center.lax -rw-rw-r-- 1 root root installvariables.properties -rw-rw-r-- 1 root root uninstaller.jar Installation Guide...
  • Page 150 Appendix A: Symantec Brightmail AntiSpam Files Symantec Brightmail AntiSpam™...

  • Page 151: Appendix B: Third Party Licenses

    This Appendix contains the licenses and notices for third-party software used in Symantec Brightmail AntiSpam. Symantec Brightmail AntiSpam uses the ADAPTIVE Communication Environment (ACE[TM]) libraries maintained by the Center for Distributed Object Computing of Washington University. Copyright and Licensing Information for ACE[TM] and TAO[TM] ACE[TM] and TAO[TM] are copyrighted by Douglas C.
  • Page 152 Apache Software Foundation, please see http://www.apache.org/. Apache Portable Run-time ============================================================================= Symantec Brightmail AntiSpam contains software derived from the Apache Portable Runtime function, which is derived from software contributed to Berkeley by Guido van Rossum: Copyright (c) 1989, 1993, 1994 The Regents of the University of California.

  • Page 153: Installation Guide

    MD5 Message-Digest Algorithm Symantec Brightmail AntiSpam contains software derived from the RSA Data Security, Inc. MD5 Message-Digest Algorithm, which is (c) 1991, 1992 RSA Data Security, Inc. Created 1991. All rights reserved. MD5 is a registered trademark of RSA Data Security, Inc.
  • Page 154 [including the GNU Public Licence.] parseaddr Symantec Brightmail AntiSpam contains software derived from CMU's RFC 822 address parser, which is developed by Computing Services at Carnegie Mellon University (http://www.cmu.edu/computing/). Copyright (c) 1998-2000 Carnegie Mellon University. All rights reserved.
  • Page 155 SUCH DAMAGE. SpamAssassin Symantec Brightmail AntiSpam contains software derived from SpamAssassin (http://www.spamassassin.org/), and is used here under Perl's Artistic License. Portions of SpamAssassin were converted from Perl to C. SpamAssassin is Copyright 2000-2002, Justin Mason (jm@jmason.org). All rights reserved. The original work on SpamAssassin can be obtained here: http://www.spamassassin.org/downloads.html The "Perl Artistic License"...
  • Page 156 The conditions indicated in the above permission notice are met; The following copyright notices are retained when present, and conditions provided in accompanying permission notices are met : Copyright 1994 Hewlett-Packard Company Copyright 1996,97 Silicon Graphics Computer Systems, Inc.Copyright 1997 Moscow Center for SPARC Technology. Symantec Brightmail AntiSpam™...

  • Page 157: Index

    58 SMTP virtual server 50 starting, automatic 73 Spam Folder Agent 93 testing 75 Symantec Plug-in for Outlook 90 uninstalling 73 Symantec Spam Folder Agent for Domino 95 Brightmail Filter 33 Configuring Sendmail for the Brightmail Filter 33 Installation Guide...
  • Page 158 Spam Folder Agent 94 Deploying the brightmail.war 86 Symantec Plug-in for Outlook 87 Directories and files 107 Symantec Spam Folder Agent for Domino 95 Installing Brightmail Control Center 57 installation log 76 installing MySQL Connector/J API 81 Email categories 6...
  • Page 159 Brightmail Filter with m4 41 setup 89 configuring for Brightmail Filter with software requirements 89 sendmail.cf 40 Symantec menu items 88 enabling external filtering 17 Symantec Spam Folder Agent for Domino mail filter API 33 configuring 95 Milter 33 Installation Guide...
  • Page 160 145 Uninstalling Brightmail Control Center 73 Brightmail Scanner, Sendmail 31 Brightmail Scanner, Windows 54 Symantec Spam Folder Agent for Domino 103 UNIX directories and files for Brightmail Control Cen- ter installation 61 directories and files for Brightmail Scanner installation 20 See also Linux, Solaris.

This manual is also suitable for:

Brightmail antispam 6.0

Table of Contents