Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual page 423

RapiDeploy Command-line Switches (Continued)
Switch [parameters]
-m[mode]
-makeimx
-mcastspeed[speed]
-mclient
-mcint:[n.n.n.n]
Deployment Solution
Details
Function Sets the operating mode.
Modes
u (Upload image)
d (Download image)
dd (Disk-to-disk)
b (Multicast only)
mm (Multicast master)
ub (Upload and multicast image)
db (Download and multicast image)
client (Client mode)
Examples
To upload an image, type
[filename]
rdeploy -mu -f
To designate a computer as a Client PC, type
rdeploy -mclient
See also -f[path & file name],
Function Minimizes the number of disk swaps that occur when
restoring a hard disk image that has been split across multiple
CDs or other storage media. This switch causes RapiDeploy to
create an .imx (IMage IndeX) file which contains data that may
reside on other CDs. If RapiDeploy has access to the .imx file, it
will not prompt you to insert any CD more than once.
Use the -makeimx switch when you create an image. However,
no switches are needed when restoring the image. Once the
split image file has been created and you are ready to burn the
image to CDs, put the .imx file on the CD with the first .img split
image file. Subsequent split image files do not require the .imx
file to be placed on the CD.
Sets the speed used in multicast operations. Range: 1 or
greater. Deployment Solution 6.5 and previous use 1 as default,
later versions use 5.
Function Operate in client mode. When multicasting, set this
flag to force the computer to not attempt to act as master.
Function Specifies the interface used for multicasting. This is
useful if you have a computer with multiple NICs and you want
to force multicast data to use a specific NIC.
RapiDeploy Technical Reference
-i[IDnumber]
423