General Error Messages - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

General Error Messages

Error Message
"Error reading . . ."
"Error writing . . ."
"Error reading from file."
"Error writing to file."
"Error opening file for
reading."
"Error opening file for
writing."
"Error saving image info to
file."
"Error closing file."
"Error reading image
information."
"Geometry Error . . ."
"Invalid geometry exception
. . ."
"No such drive . . ."
"Error reading drive
parameters from BIOS."
"Bad image number. File is
not an image file."
"Bad image number. Buffer
doesn't contain image data."
"Bad file version number.
Cannot read the file."
"Bad version number. Buffer
doesn't contain image data."
"Too many clients for
current license count."
Deployment Solution
Description
Explanation: An error occurred while reading or writing to
the disk.
Possible causes:
Faulty disk hardware.
A write-protected disk. The BIOS in some computers has an
antivirus capability which attempts to protect the disk from
Master Boot Record (MBR) viruses by write-protecting the
first sector or track on the hard disk.
Explanation: An image file could not be accessed.
Possible causes:
The file does not exist, or cannot be read (for downloads).
The image file is corrupt.
The directory does not exist or cannot be written to (for
uploads).
The disk where the image file is being written is full.
Explanation: There was an error converting cylinders,
heads, and sectors to logical blocks or vice versa.
Possible cause: Invalid or corrupt BIOS drive geometry
settings.
Explanation: The specified drive could not be accessed.
Possible cause: An invalid drive letter was entered.
Explanation: The program received an error from the BIOS
while trying to read disk geometry information.
Possible Cause: Often occurs when trying to run a DOS
application from Windows.
Explanation: The file is not recognized as an image file.
Possible causes:
The file is not a valid image file.
File was created with a different version of the imaging
program, which is not compatible.
Data loss is occurring over the network.
Explanation: More clients connected to the Console or
Master computer than the license allows.
Action: Upgrade your license to support more nodes. Call
your authorized reseller for more information.
Error Codes
444