Custom Install Entries - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Deployment Solution
For WinPE x64, to use an add-on file, specify the path of the add-on file in
PBWindowsPEX64AddOnPath
Example
PBWindowsPEX64AddOn=TRUE
PBWindowsPEX64AddOnPath=c:\DSSetup\AddonX64.exe
To specify the WinPE disk path, specify the path in
the operating system path in
field should be .
True
Example
PBWindowsPEX64=TRUE
PBWindowsPEWinPEX64Path=c:\WinPE\Disk1
PBWindowsPEX64OSPath=c:\WinPE\Disk2
For WinPE IA64, to use an add-on file, specify the path of the add-on file in
PBWindowsPEIA64AddOnPath
Example
PBWindowsPEIA64AddOn=TRUE
PBWindowsPEIA64AddOnPath=c:\DSSetup\AddonIA64.exe
To specify the WinPE disk path, specify the path in
operating system path in
should be .
True
Example
PBWindowsPEIA64=TRUE
PBWindowsPEWinPEIA64Path=c:\WinPE\Disk1
PBWindowsPEIA64OSPath=c:\WinPE\Disk2

Custom Install Entries

If the InstallType is set to custom, the following entries will be expected in the
SILENT.INI file. If any of the entries are missing then default values will be used. Using
default values is not recommended because it may cause the validator function to abort
the install because the default values won't work with the specified values. Any entries
other than the ones listed below will be ignored for a custom install.
Note
If you attempt to push out a silent Deployment Solution install to a computer where
Microsoft SQL Server is installed and SQL Server has a password for the "sa" account,
then it will not work.
DAPath=C:\Program Files\Altiris\eXpress\Deployment Server
LicenseFile=ax85.lic
DAUsername=Administrator
DAPassword=password
. The
PBWindowsPEX64AddOn
PBWindowsPEX64OSPath
. The
PBWindowsPEIA64AddOn
PBWindowsPEIA64OSPath
Command-Line Switches
field should be
PBWindowsPEWinPEX64Path
. The
PBWindowsPEWinPEX64
field should be
and the
PBWindowsPEIA64
. The
PBWindowsPEIA64
.
True
and
.
True
field
409