Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual page 390

Deployment Solution
Parameters
VendorID
DeviceID
PCIFunction
PCIDevice
PCIBus
WINS-Server1
WINS-Server0
WINS-Server-Count
WINS-Enabled
SetWINSInfo
DNS-Server2
DNS-Server1
DNS-Server0
DNS-Server-Count
DNS-Domain
DNS-Host
DNS-Enabled
SetDNSInfo
Details
Specifies the Vendor ID for the NIC.
Example: Vendor ID=32902.
Specifies the device ID for the NIC.
Example: Device ID=4153.
Specifies the PCI Function for the NIC.
Example: PCI Function=0.
Specifies the PCI Device for the NIC.
Example: PCI device=8.
Specifies the PCI Bus for the NIC.
Example: PCI Bus=1
Specifies the WINS Server 1 for TCP/IP.
Example: WINS-Server1=0.0.0.0.
Specifies the WINS Server 0 for TCP/IP.
Example: WINS-Server0=0.0.0.0.
Specifies the number of WINS servers for TCP/IP.
Example: WINS-Server-Count=2.
Specifies whether the WINS servers are enabled.
Example: WINS-Enabled=True.
Specifies whether to set the WINS information.
Example: SetWINSInfo=True.
Specifies the DNS server 2 for TCP/IP.
Example: DNS-Server2=0.0.0.0.
Specifies the DNS server 1 for TCP/IP.
Example: DNS-Server1=0.0.0.0.
Specifies DNS server 0 for TCP/IP.
Example: DNS-Server0=0.0.0.0.
Specifies the number of DNS Servers for TCP/IP.
Example: DNS-Server-Count=3.
Specifies the DNS domain for TCP/IP.
Example: DNS-Domain=mydomain.com
Specifies the name of the DNS host.
Example: DNS-Host=TSTWXP2.
Specifies whether the DNS is enabled.
Example: DNS-Enabled=True.
Specifies the DNS information for TCP/IP.
Example: SetDNSInfo=True.
Command-Line Switches
390