Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual page 397

Deployment Solution
Parameters
BlockedDaySat
Proxy
WakeOnLANProxy
MCastProxy
MCastProxyRate
BootWorks
EnableDirectDiskAccess
UpdateBootworkTransport
UpdateBootworkIP
BootDiskMessageUsage
Other
Details
Specifies whether to block the client from connecting
to the Deployment Server between the times specified
in ScheduledBlockStart and ScheduledBlockEnd on
Saturdays.
Example: BlockedDaysSat=True.
Forward Wake On LAN packets sent from the
Deployment Server.
Example: WakeOnLANProxy=Yes.
Specifies whether to advertise for the Deployment
Server the client is connected to. This allows local
clients to discover the server on a remote network
through TCP/IP multicast.
Example: MCastProxy=Yes.
Specifies how often to send multicast advertisements
in seconds. MCastPRoxy should be set to 'Yes' for this
setting to work.
Example: MCastProxyRate=900.
Specifies whether to enable direct disk access to
BootWorks.
Example: EnableDirectDiskAccess=Yes.
Specifies whether to synchronize transport (IP/
multicast) settings with Bootworks.
EnableDirectDiskAccess must be enabled for this
setting to work.
Example: UpdateBootworkTransport=Yes.
Specifies whether to synchronize TCP/IP (static IP,
netmask/DHCP) settings with Bootworks.
EnableDirectDiskAccess must be enabled for this
setting to work.
Example: UpdateBootworkIP=Yes.
Specifies when the user should be prompted for a
Bootworks boot disk when performing tasks from DOS.
Example: BootDiskMessageUsage= 0 for Never;
BootDiskMessageUsage=1 for Always;
BootDiskMessageUsage=2 if Bootworks is not
detected; BootDiskMessageUsage=3 if PXE is not
detected; and BootDiskMessageUsage=4 if neither
BootWorks nor PXE is detected.
Command-Line Switches
397