Rapideploy Command-Line Switches - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

RapiDeploy Command-line Switches

RapiDeploy Command-line Switches
Switch [parameters]
-?
-align:[cyl|track|none]
-bsl:[maximum
bandwidth]
-c[compression mode]
Deployment Solution
Switches can be entered in any order and they are not case sensitive. When using
multiple switches, leave a space between each option.
You can also get a list of switches at the DOS prompt by typing the following:
rdeploy -?
If you want to redirect this list to a file, type the following:
rdeploy -? -text > rdparams.txt
The following table lists all the command-line switches that you can use with
rdeploy.exe.
Details
Function Shows command-line help.
Function Sets partition alignment to the provided values. None
disables partition geometry rounding entirely, which very
slightly affects the partitions when restoring an image.
Function Determines the maximum bandwidth to be used by
the multicasting session.
Example To limit the bandwidth to 5 Megabits per second, type
rdeploy -bsl:5
Function Sets the compression mode for image creation. Speed
is the default mode.
Modes
off turn compression off.
size make smallest image size with slight speed penalty.
speed (default) make a less compressed image in less time.
balanced make a reasonable compressed image with a reduced
speed penalty.
Example To optimize image creation for speed, type
rdeploy -mu -f
RapiDeploy Technical Reference
[filename] -cbalanced
417