Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual page 424

RapiDeploy Command-line Switches (Continued)
Switch [parameters]
-mconv
-mig:[filename]
-n
-nobw
-nocancel
-nooem
-noprompt
-nors
-nospacecheck
-nt64k
(Download only)
Deployment Solution
Details
Function Used with the
file (.img) to a self-extracting .exe file. (Does not upload or
download; just converts the file.)
Example To convert a file named WINXP.IMG, type
rdeploy -mconv -fwinXP.img
See also -f[path & file name]
Function Used to specify a migration file. Prompts before
overwriting the drive. This is used mainly by PC Transplant Pro.
Function Do not save the image to the destination. This is
useful to see if an image capture completes successfully without
consuming disk space.
Function Makes sure that a BootWorks partition does not exist
in the destination, is not on the disk when restoring, and is not
in the image when creating.
Example To remove an existing BootWorks partition from a
hard disk and exclude the BootWorks partition from being
downloaded with an image, type
[filename]
rdeploy -md -f
See also -m[mode], -f[path & file name]
Function Does not allow the user to cancel the imaging task.
Function Makes sure that an OEM partition does not exist in the
destination, is not on the disk when restoring, and is not in the
image when creating.
Example To remove an existing OEM partition from a hard disk
and exclude the OEM partition in an images from being restored,
type
[filename]
rdeploy -md -f
See also -m[mode], -f[path & file name]
Function Prevents any need for user interaction. Example:
clicking OK after an error occurs. This is very useful in scripting
situations where there won't be a user present to hit a key.
Function Makes sure that a recovery partition does not exist in
the destination, is not on the disk when restoring, and is not in
the image when creating.
Function Don't check for available space on the volume when
creating an image.
Function (NT computers only) Enables a 64K cluster size with a
FAT16 partition. This allows you to resize a FAT16 partition up to
4 GB rather than the normal 2 GB limit.
Example To change the size, type
[filename]
rdeploy -md -f
See also -m[mode], -f[path & file name]
RapiDeploy Technical Reference
switch to convert an existing image
-f
-nobw
-nooem
-nt64k
424