Adlagent.config Parameters - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Parameters
UseRCDrivers
UserName
ServerName

ADLAgent.config Parameters

Deployment Solution
Details
Function: Specifies whether or not to install keyboard and mouse
filter drivers that enable remote control on Windows client
computers. (The default is "
Example: To install the drivers for remote control, type
UseRCDrivers=Yes
Function: Associates a computer with the primary user or users.
This is used to target RIP deployments to a specific user or group of
users. To assign more than one user, separate the names with
semicolons.
Examples: To associate user Fred with the client being installed,
type
UserName=Fred
To associate users Fred and Sam with the client, type
UserName=Fred;Sam
Function: Specifies the computer name of the Deployment Server
you want the client to connect to. This is useful if you have multiple
Deployment Servers on your network and you do not want the
client to connect to the first Server it finds.
The ServerName parameter is only valid if you are using
multicasting (by setting MCastAddr and MCast Port parameters).
Note
ServerName can only be set after the multicast parameters,
MCastAddr and MCastPort, are set.
Example: To restrict client connection to a Server named
"Server3," type
ServerName=Server3
Note
A CR/LF (blank line) is needed at the end of the aclient.inp file in order for it to be
utilized when installing Deployment Agent for Windows.
You can use the ADLAgent.config file to configure the ADLAgent service settings. When
the ADLAgent service is suspended, certain information is needed to restore the
previous settings. This information is saved in the ADLAgent configuration file. This
ensures that the next time the computer reboots, the ADLAgent service starts up
without any problems.
Command-Line Switches
," so the drivers are not installed.)
No
383