Deployment Server Install Switches - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Deployment Server Install Switches

Switch
-s
-a
-t
Deployment Solution
Use w to specify the name of a wallpaper/graphic file to replace the default. See the
table above for details on using graphics files.
When x is used, the wallpaper/graphic appears and the KBDSCLK program exits,
ignoring all other commands except w and h, regardless of order. KBDSCLK does
not remain loaded as a TSR, so the keyboard is not locked.
If the utility is loaded as a TSR (in the
KBDSCLK on the command line and specify the k and s options, it changes the
keyboard and screen lock settings of the TSR instance. Options w, p, and b are
ignored, regardless of order. If the TSR is not loaded, w, p, and b can be used with
k and s in any order.
The p option can be used on the command line to set a password for unlocking the
screen and keyboard.
You can run the Deployment Server installation executable (
command-line using these switches:
Details
Function: Runs a Simple install where all components are installed on a
single computer.
Example:
axinstall -s
Function: Adds a component when installing a custom install where
components—the Deployment Server database, PXE server, Deployment
Share, services— can be installed on separate computers.
Example:
axinstall -a
Function: Allows you to run a silent install (where the install application
executes without asking for user input.
Example:
axinstall -t
Command-Line Switches
file), and you execute
autoexec.bat
axinstall.exe
) from the
405