Authentication Option; Connections Option - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Authentication Option

Connections Option

Altiris® Deployment Server® Configuration Utility
4. Click OK.
To set the maximum bandwidth used during multicasting
1. Open the Deployment Server Configuration Utility in the Control Panel of the
Deployment Server computer.
2. Click Options and click the Disk Imaging tab.
3. Select the Limit each disk image multicast to n Mbps check box and set n to the
maximum bandwidth you want a multicasting operation to use.
4. Click OK.
The Authentication tab lets you authenticate to an existing SQL Server database, to
the NetWare Server as a file access point, and to the Deployment Server.
To access and authenticate to a specified Microsoft SQL Server
database
1. In the Database Authentication section, select the Use SQL Server account
authentication check box.
2. Enter the user name for the specified database.
3. Enter the password.
To access and authenticate to a Novell NetWare Server
NetWare Server Authentication
1. In the
selected server.
2. Enter the password.
To access and authenticate to the Deployment Server
DS Authentication
1. In the
server you want to connect to.
2. Click Delete Key to delete the security key for a Deployment Server.
3. Click Export Key to export and save the security key for your Deployment Server to
a file.
The Connections tab lets you allow or reject connections from the Deployment Agents
based on the IP subnet, IP address, and local interfaces.
Define Subnets
Select the Allow/reject agents based on their IP subnet check box and click
Define Subnets. The TCP/IP Subnet Filters dialog appears. You can add, modify, or
remove a Network Address and the corresponding Subnet Mask. You can also specify
whether to allow or reject only these subnets to connect.
Deployment Server Configuration Utility
section, enter the user name for the
section, click Add Key to add a security key for the
271