Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual page 391

Deployment Solution
Parameters
Gateway
Netmask
Address
DHCP
SetIPInfo
NIC-Section-Count
Interface0
State
Gateway
Netmask
IP-Address
DHCP
Name
Interface1
State
Gateway
Netmask
IP-Address
NICEntry
Details
Specifies the Gateway information for TCP/IP.
Example: Gateway=172.17.31.2.
Specifies the Netmask value for TCP/IP.
Example: Netmask=255.255.255.0.
Specifies the address for TCP/IP.
Example: Address=172.17.31.98.
Specifies the DHCP value for TCP/IP.
Example: DHCP=True.
Specifies whether to set the IP information for TCP/IP.
Example: SetIPInfo=True.
Specifies the NIC section count for TCP/IP.
Example: NIC-Section-Count=2.
Specifies the state of Interface0.
Example: State=Up.
Specifies the gateway of Interface0.
Example: Gateway=172.17.31.2.
Specifies the netmask of Interface0.
Example: Netmask=255.255.255.0.
Specifies the IP address for Interface0.
Example: IP-Address=172.17.31.98.
Specifies the DHCP value for Interface0.
Example: DHCP=Yes.
This is the name of Interface0.
Example: Name=eth0.
Specifies the state of Interface1.
Example: State=Up.
Specifies the gateway of Interface1.
Example: Gateway=10.10.10.1.
Specifies the netmask of Interface1.
Example: Netmask=255.0.0.0.
Specifies the IP-Address for Interface1.
Example: IP-Address=10.10.10.10.
Command-Line Switches
391