Proxy; Startup And Shutdown - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

File name. Enter the name and path of the log file. The default path is \Program
Files\Altiris\AClient\AClient.log file.
Maximum size. Enter the maximum number of bytes for each log file.
Log errors. Select this option to save only the errors returned when running a job or
operation between the Deployment Server and the Deployment Agent.
Log informational messages. Select this option to save a list of procedural steps run
on the client computer.
Log debugging information. Select this option to list comprehensive debugging
information in the text file.
Note
If the log exceeds the specified size, the older data is dropped from the files, so it is
recommended to provide maximum file size.

Proxy

Typically, remote networks on the other side of a router or switch cannot receive
multicast or Wake-On-LAN packets from the Deployment Server. Setting the managed
computer as a proxy client computer forwards or re-creates the multicast packets. A
managed client computer setup as a multicast proxy simply acts as a Deployment
Server and advertises the server's name and IP address through multicasting. You can
also set the managed computer as a proxy to send Wake-On-LAN packets.
Set these options to control how the managed computer acts as a proxy agent,
identifying the type of traffic this managed computer forwards from the server.
Forward Wake-On-LAN packets. Select if you want the managed computer to
forward Wake-on-LAN packets.
Forward Deployment Server discovery multicast packets. Select if you want to
advertise the Deployment Server to client computers on another LAN segment or if the
client computer is on the other side of the router.
Send multicast advertisement every. Set the time in seconds, minutes, or hours for
managed computers to send a multicast advertisement.

Startup and shutdown

Delay starting jobs after system startup. Set the time in seconds, minutes, or hours
for managed computers to delay jobs until after system startup.
Specify the Windows boot drive. Specify the drive that the client computer boots
from. The default is the C drive.
Force all programs to close when shutting down. Select this option to shut down
applications when using Power Control features. The user is still prompted to Abort or
Continue the shutdown.
Synchronize date/time with Deployment Server. Select this option to synchronize
the system clock of managed computers with the time of the Deployment Server.
Prompt for a boot disk when performing automation jobs. Select this option to
prompt for a boot disk while running any automation jobs.
Advanced
Altiris Deployment Solution™ from Symantec User's Guide 115