Operator Panel; Names And Functions; Daily Care; Replacing The - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 4 How to Use the Operator Panel

4.1 Operator Panel

The operator panel consists of the Function Number Display,
buttons, and LED indicator.

Names and Functions

*1: For details about how to scan by pressing the [Scan/Stop] or
[Send to] button, refer to the TWAIN driver Help (included in the
Setup DVD-ROM) or "Using a Button on the Scanner to Start
Scanning" (page 101).
*2: When using TWAIN driver, pressing the [Send to] button during
scanning will pause the scan after that document is scanned.
When using ISIS driver/Kofax VRS/ScanSnap mode, pressing the
[Send to] button during scanning will cancel the scan after that
document is scanned.
Do not use the operator panel while the Software Operation
Panel is running.
LED indicator
Lights in orange when an error occurs.
Check
Flashes when the ADF is open.
Function Number Display
Function
Indicates the status of the scanner.
Switches off when the scanner enters power saving mode.
Send to
[Function] button
Scan
/Stop Switches the number (1 to 9/C) assigned to the application
launched by the [Send to] button.
Power
[Send to] button (*1)
Launches the linked application software.
Clears the displayed error indication.
Pauses the scan. (*2)
[Scan/Stop] button (*1)
Launches the linked application software.
Clears the displayed error indication.
Cancels or resumes the scan.
[Power] Button
Turns the power on/off.
Lights in green when the scanner is turned on.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan

Daily Care

Replacing the

Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
64