Chapter 3 Configuring the Scan Settings
3.2 ISIS Driver
The ISIS driver is a driver that conforms to the ISIS standard.
It can be used with an application that supports ISIS to
perform scanning.
Normally, the scanner driver is launched via an application,
and then the scan settings are configured in the setup dialog
box of the driver (some applications may not display the setup
dialog box).
Ways to launch the scanner driver differ depending on the
application.
For more details, refer to the manual or the Help files of the
application.
Settings for ISIS driver are configured in the above dialog box.
For details, refer to the ISIS driver Help.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
56