Advanced Scanning; Removing A Color From The Scanned Image (Dropout Color) - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 5 Various Ways to Scan

5.3 Advanced Scanning

Removing a Color from the Scanned Image
(Dropout Color)
You can select either green, red, blue (primary colors), or a
color of your choice to remove the details of the selected color
from a scanned image.
For example, if a document with black characters and a green
background is scanned, only the black characters will appear
on the scanned image if [Green] is selected.
ABC
Example: When [Green] is selected for dropout color
Dropout works the best with light (low intensity) colors, and
dark colors may not drop out.
Dropout color is only available in black & white or grayscale
mode.
1
Load the document.
For details, refer to "Chapter 2 How to Load Documents" (page
ABC
37).
2
Start up ScandAll PRO and select the [Scan] menu
[Scanner Setting].
The [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
3
Click the [Advance] button.
The [Advance] dialog box appears.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
82