Clearing The [View Only Mode] - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 9 Operational Settings

Clearing the [View Only mode]

Clear the [View Only mode] in the following procedure.
1
Right-click the Software Operation Panel icon on the
taskbar, and select [View Only mode] from the menu.
The [Password setting] dialog box appears.
2
Enter the current password and click the [OK] button.
[View Only mode] is cleared, and the scanner settings can now be
changed.
When you exit [View Only mode], the check mark next to
[View Only mode] disappears from the menu that is
displayed by right-clicking the Software Operation Panel
icon.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
156