Fujitsu 6240 - fi - Document Scanner Operator's Manual page 107

Chapter 5 Various Ways to Scan
4
Press the [Function] button and confirm that the function
number is flashing faster, and then either press the [Scan/
Stop] button or perform a scan from the computer.
From this point, note that the flashing speed of the Function Number
Display switches between "slow"
[Function] button. When the flashing speed is fast, the scanner
operates in each mode as follows:
Do not hold down the [Function] button for more than 5
seconds when switching the flashing speed, because it
may erase the memorized multifeed patterns.
Manual mode (Bypass by front panel button)
Scans the next sheet without multifeed detection, and from the
second sheet, multifeeds are detected based on the setting
configured in the scanner driver or the Software Operation Panel.
Auto mode 1 (Bypass by combination of length and position)
Memorizes the length and location of the paper attachment that
was detected as multifeed, and continues scanning. When a paper
attachment of a similar pattern is detected, multifeed detection is
automatically suppressed. (*1)(*2)
Auto mode 2 (Bypass by length)
Memorizes the length of the longest paper attachment that was
detected as multifeed, and continues scanning. When a paper
attachment of the same length or shorter is detected, multifeed
detection is automatically suppressed. (*1)(*2)
*1: 32 pages (up to 4 attachments per page) worth of overlap
patterns can be memorized in this mode. When it exceeds this
limit, the first pattern that was memorized is erased from the
memory.
*2: To erase the memorized overlap patterns and the longest
overlap length, hold down the [Function] button for more than 5
seconds while the function number is flashing. The Function
Number Display will then display "□". This allows you to erase
multifeed patterns and the longest overlap length that were not
supposed to be memorized. Be careful with this operation
because all memorized patterns will be erased.
"fast" every time you press the
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
107