Download Print this page

Fujitsu ScanPartner 15C Installation Procedures

Hide thumbs

Advertisement

Quick Links

ScanPartner15C\600C\620C\93GX\3091DC\3092DC
Step A: Removing the shipping bracket.
It is recommended that before you connect the scanner to your computer that you inspect the
scanner and remove the shipping bracket first. The SP3091\3092DC's do not have shipping
locks.
Removing the shipping bracket: Your ScanPartner comes with a factory installed
shipping bracket designed to protect the scanner during shipment. Before the scanner
can be used, the shipping bracket must be removed. Follow these instructions to remove
the shipping bracket:
1. Tilt the scanner on its side as shown in figure 2-1
2. Unscrew the retainer screw and remove the shipping bracket.
3. Place the shipping bracket in the "use position" slot and secure it with the retainer
screw (see figure 2-2)
4. Place scanner back in its normal position
Win95\98\ME Installation Procedure
Rev050404A

Advertisement

loading

  Related Manuals for Fujitsu ScanPartner 15C

  Summary of Contents for Fujitsu ScanPartner 15C

  • Page 1 ScanPartner15C\600C\620C\93GX\3091DC\3092DC Win95\98\ME Installation Procedure Step A: Removing the shipping bracket. It is recommended that before you connect the scanner to your computer that you inspect the scanner and remove the shipping bracket first. The SP3091\3092DC’s do not have shipping locks. Removing the shipping bracket: Your ScanPartner comes with a factory installed shipping bracket designed to protect the scanner during shipment.
  • Page 2 SCSI host adapter. Setting Termination: The Fujitsu ScanPartner comes complete with a built in SCSI terminator (see Fig 2-3). If the Scanner is the last device in the SCSI chain, the terminator should be switched to ‘On’.
  • Page 3 ScanPartner15C\600C\620C\93GX\3091DC\3092DC Win95\98\ME Installation Procedure Connecting SCSI cable: Included with the ScanPartner is a SCSI cable used to connect the scanner to the host adapter. Located on the back of the scanner are 2 SCSI ports, one 50-pin centronics and one DB25-pin. The SP93GX has two 50-pin centronics ports. Use the cable provided to connect to the 50-pin centronics port and the DB25-pin port on the SCSI controller.
  • Page 4 ScanPartner15C\600C\620C\93GX\3091DC\3092DC Win95\98\ME Installation Procedure 8. Click on Save and then use the browse (or other folder navigation) button until you have the ISIS Download folder you created in the Save In Box. 9. Click Save. 10. When completed close the Download Complete window and go to the ISIS Download folder.
  • Page 5 2. After the Untitled Screen has open, click on Scan and choose Select Source. 3. Select the Fujitsu Twain source for your scanner by Highlighting it and clicking OK. You will only need to do this once unless you are scanning with multiple sources.

This manual is also suitable for:

Scanpartner 620cScanpartner 93gxScanpartner 600cScanpartner 3091dcScanpartner 3092dc