Documents With Different Widths - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 5 Various Ways to Scan

Documents with Different Widths

When you scan a mixed batch with different widths, some of
the smaller documents may be skewed or not fed into the ADF.
In that case, separate the documents by their widths, and scan
them in different batches.
For more details about scanning a mixed batch of documents,
refer to "Conditions for Mixed Batch Scanning" (page
1
To avoid skewed images and detect the paper size
automatically, select [Automatic Page Size Detection] in
[Automatic Size and Skew Detection].
For details, refer to "Automatically Correcting Skewed Images" (page
91).
2
Align the top of the documents.
3
Place the documents at the center of the ADF paper
chute, and adjust the side guides to the widest document
in the batch.
For details, refer to "Chapter 2 How to Load Documents" (page
Make sure that all documents are placed underneath the
pick roller. Otherwise, some documents may be skewed
or not fed into the ADF.
47).
37).
4
Scan the document by selecting the [Scan] menu
[Scan] in ScandAll PRO.
TOP
Contents
Index
Introduction
Scanner
Pick roller's width
Overview
How to Load
Good
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Pick roller's width
Scan
Bad Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
69