Documents For Scanning (Adf); Paper Size; Conditions; Introduction - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 2 How to Load Documents

2.3 Documents for Scanning (ADF)

Paper Size

The following paper sizes can be scanned.
A
Feed direction
B
Portrait
A: 52 to 216 mm (2.1 to 8.5 in.)
B: 74 to 355.6 mm (2.9 to 14.0 in.) (*1)
C: 74 to 216 mm (2.9 to 8.5 in.)
D: 52 to 355.6 mm (2.1 to 14.0 in.) (*1)
*1: Long page scanning supports documents with a length up to 3,048 mm
(120 in.).
C
D
Feed direction
Landscape

Conditions

Paper type
The following paper types are recommended:
Wood-free paper
Wood-containing paper
PPC paper (recycled)
Plastic card
When using paper types other than the above, make sure to test with
the same type of paper first to check if the document can be scanned.
Paper weight (thickness)
The following paper weights can be used:
41 to 209 g/m² (11 to 56 lb)
127 to 209 g/m² (34 to 56 lb) for A8 size
1.4 mm or less for plastic cards (*1)
*1: Up to 1.25 mm is supported for scanning at 200 dpi (60 ppm) in
landscape when using fi-6140Z/fi-6240Z. This setting can be
changed in the Software Operation Panel to scan plastic cards with
a thickness up to 1.4 mm. For details, refer to
Plastic Cards [Feed Mode] (fi-6140Z/fi-6240Z)" (page
TOP
Contents
Index

Introduction

Scanner

Overview

How to Load
Documents

Configuring the

Scan Settings

How to Use the

Operator Panel

Various Ways to

Scan
Daily Care
" Scanning Thick
179).
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
41