Fujitsu 6240 - fi - Document Scanner Operator's Manual page 71

Chapter 5 Various Ways to Scan
3
Start up ScandAll PRO and select the [Scan] menu
[Scanner Setting].
The [TWAIN Driver (32)] dialog box appears.
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by selecting the [Tool]
menu [Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
4
Select [Double-page spread] for [Scan Type].
5
Click the [Carrier Sheet] tab and configure settings such
as [Image Mode].
6
Click the [OK] button.
The settings are saved.
7
Scan the document by selecting the [Scan] menu
[Scan] in ScandAll PRO.
The images on the front and back are merged into a single image.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
71