Starting Up The Software Operation Panel - Fujitsu 6240 - fi - Document Scanner Operator's Manual

Chapter 9 Operational Settings

9.1 Starting Up the Software Operation Panel

The Software Operation Panel (SOP) is installed together with
TWAIN driver, ISIS driver and Kofax VRS.
This application allows you to configure various settings such
as the operation of the scanner and managing the
consumables.
Do not use the operator panel while the Software Operation
Panel is running.
If you connect multiple scanners, the second scanner and
so forth will not be recognized.
Connect only one scanner at a time.
1
Confirm that the scanner is connected to the computer,
then turn on the scanner.
For details, refer to "1.3 Turning the Power ON/OFF" (page
2
Select the [Start] menu
Utility for Microsoft Windows]
Panel].
23).
[All Programs] [Scanner
[Software Operation
The [FUJITSU Software Operation Panel] dialog box appears.
The Software Operation Panel icon is displayed in the menu that
appears when you click on the taskbar.
To have the Software Operation Panel icon always displayed on
the taskbar, drag the icon and drop it onto the taskbar.
Procedures from here will be explained under the assumption that
the Software Operation Panel is always displayed on the taskbar.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
153