Juniper PHYSICAL LAYER - CONFIGURATION GUIDE V11.1.X Configuration Manual page 120

JUNOSe 11.1.x Physical Layer Configuration Guide
To display statistics for SONET and SDH interfaces, use the show controllers sonet
commands. Use the delta options to display statistics with the baseline subtracted.
baseline line interface sonet
baseline path interface sonet
baseline section interface sonet
98
Monitoring SONET/SDH Interfaces
Use to set a statistics baseline for the SONET/SDH line layer.
The router implements the baseline by reading and storing the MIB statistics at
the time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved.
Use the total [ delta ] keywords with the show controllers sonet line command
to view the baseline statistics.
Example 1 Sets a baseline for SONET line layer interfaces on ERX14xx models,
ERX7xx models, or the ERX310 router
host1#baseline line interface sonet 2/0
Example 2 Sets a baseline for SONET line layer interfaces on the E320
Broadband Services Router
host1#baseline line interface sonet 3/0/0
There is no no version.
See baseline line interface sonet.
Use to set a statistics baseline for the SONET/SDH path layer.
The router implements the baseline by reading and storing the MIB statistics at
the time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved.
Use the total [ delta ] keywords with the show controllers sonet path command
to view the baseline statistics.
Example 1 Sets a baseline for SONET path layer interfaces on ERX14xx models,
ERX7xx models, or the ERX310 router
host1#baseline path interface sonet 2/0
Example 2 Sets a baseline for SONET path layer interfaces on the E320 router
host1#baseline path interface sonet 3/0/0
There is no no version.
See baseline path interface sonet.
Use to set a statistics baseline for the SONET/SDH section layer.
The router implements the baseline by reading and storing the MIB statistics at
the time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved.