Security Settings - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

Figure 8-2 HP Jetdirect Security Page
The parameters in each section of the Security page are described in the following table.

Security settings

This section of the Security page displays similar information to that provided by the standard
HP Jetdirect configuration page. See the following table.
Table 8-15 General Information
Message
802.1X
IPsec
150 Chapter 8 HP Jetdirect configuration pages
Description
EAP/802.1X client authentication setting to use.
EAP-TLS Use EAP-TLS.
EAP-PEAP Use EAP-PEAP.
Specified Use an 802.1X authentication protocol other than EAP-TLS/EAP-PEAP.
Not Specified No authentication specified.
Current IPsec status.
Enabled Enabled and operating as configured.
Disabled Turned off.
ENWW