Network Settings; Ipx/Spx - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

Network Settings

Use the Network Settings pages to set or change configuration parameters for
on page 76,
assign a parameter setting, enter the desired value and click Apply.
NOTE: The features displayed depend on the print server. Value-featured print servers provide limited
protocol support.

IPX/SPX

Use the IPX/SPX tab to configure IPX/SPX parameters on the HP Jetdirect print server. IPX/SPX
protocols are used for operation on a Novell NetWare or compatible IPX/SPX network (such as a
Microsoft network). For a description of the items, see
CAUTION:
IPX/SPX.
For a Novell NetWare network:
●
Use the embedded Web server to select Queue Server Mode parameters in a Novell Directory
Services (NDS) environment.
●
Do not use the embedded Web server to create the NDS print server, printer, and queue objects.
Instead, use another tool or utility.
Table 4-10 IPX/SPX tab settings
Item
IPX/SPX Enable
IPX/SPX Frame Type
SAP Interval
Print Server Name
NDS Tree Name
NDS Context
76 Chapter 4 Embedded Web server (V.38.xx)
AppleTalk on page 77,
If you are using direct-mode printing over IPX/SPX on a Microsoft network, do not disable
Description
Select the check box to use IPX/SPX protocols.
IPX/SPX frame type to use on your network. After a frame type is configured, all others are
counted and discarded.
●
All Frame Types (Auto) Sense all types and configure the first one detected (default).
●
Ethernet 802.3 (EN_8023) Use IPX over IEEE 802.3 frames.
●
Ethernet II (EN_II) Use IPX over Ethernet frames.
● Ethernet 802.2 (EN_8022) Use IPX over IEEE 802.2 with IEEE 802.3 frames.
●
Ethernet SNAP (EN_SNAP) Use IPX over SNAP with IEEE 802.3 frames.
Time interval (in seconds) that the HP Jetdirect print server waits to send SAP messages, which
are broadcast to advertise its service capabilities on a Novell NetWare network. The default is
60 seconds. Enter zero (0) to disable.
NetWare printer name for the HP Jetdirect print server. The default name is NPIxxxxxx, where
xxxxxx are the last six digits of the HP Jetdirect print server's LAN hardware (MAC) address.
Name of the NDS tree for this device. Refers to the name of the organizational tree used by
your network. To disable NDS support, leave the field blank.
NDS container or organizational unit that contains the print server object. Print queue and
device objects can be located anywhere within the NDS tree, but the HP Jetdirect print server
must be configured with the fully qualified print server object name.
For example, if the print server object is found in the container "marketing.mytown.lj", the fully
qualified print server context name (CN) is:
"OU=marketing.OU=mytown.O=lj"
DLC/LLC on page 77, and
Table 4-10 IPX/SPX tab settings on page
IPX/SPX
SNMP on page 78 protocols. To
76.
ENWW