HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual page 185

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)
Menu item
Link Speed
ENWW
Sub-menu item
Ping Results
Sub-menu item Values and Description
Yes: Print the results.
No
Execute Run the ping test.
No
Yes: Run the test
View the ping test status and results, using the control
panel display.
Packets Sent Number of packets (0 - 65535) sent to the remote host
since the most recent test was initiated or completed.
Packets Received Number of packets (0 - 65535) received from the
remote host since the most recent test was initiated or
completed.
Percent Lost Percent of sent ping test packets without a response
from the remote host since the most recent test was
initiated or completed.
RTT Min Minimum detected round trip time (RTT), from 0 to
4096 milliseconds, for packet transmission and
response.
RTT Max Shows the maximum detected round trip time (RTT),
from 0 to 4096 milliseconds, for packet transmission
and response.
RTT Average Average RTT, from 0 to 4096 milliseconds, for packet
transmission and response.
Ping in Progress Yes
running.
Refresh Update the ping test data with current results.
Yes: Update the data.
No: Maintain the existing data. (Automatically
refreshes when the menu times out or you manually
return to the main menu.)
Set the print server's link speed. The available settings
depend on the device and installed print server. Select
one of the following modes:
Auto
highest link speed and communication mode allowed.
If auto-negotiation fails, either 100TX HALF or 10TX
HALF is set depending on the detected link speed of
the hub/switch port. (A 1000T half-duplex selection is
not supported.)
10T
10T
100TX
100TX
(default): Do not print the results.
(default): Do not run the test.
a test is in progress. No a test completed or is not
(default): Use auto-negotiation to configure the
Half: 10 Mbps, half-duplex operation.
Full: 10 Mbps, full-duplex operation.
Half: 100 Mbps, half-duplex operation.
Full: 100 Mbps, full-duplex operation.
Graphical control panel menus 175