Resetting The Print Server To Factory Default Settings - HP wp110 - 802.11b Wireless Print Server Setup Manual

resetting the print server to
factory default settings
If you have trouble configuring the print
server, you may want to restore the
factory default settings. The print server's
default settings are:
• Connection Mode: ad hoc/computer
to computer
• Channel: 10
• SSID: hp
• WEP: Disabled
• Printer: server name.printer name
To return the print server to the default
settings:
1. Unplug the power cord from the print
server.
Note Do not unplug the parallel cable
from the printer.
2. Press and hold the Test button on the
back of the print server.
10
3. While pressing the Test button, plug
the power cord into the print server.
4. Continue to press the Test button until
a Print Server Configuration Page
begins to print.
5. Release the Test button.
The print server resets to the default
settings displayed on the Print Server
Configuration Page.