End The Ftp Session; Commands - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

If login is successful, a message 230 is displayed on the client system. In addition, the available
HP Jetdirect printing ports are displayed. Supported HP Jetdirect print servers provide a single port (Port
1). For a typical FTP printing session, see

End the FTP session

To end an FTP session, type quit or bye.
NOTE: Before ending an FTP session, use a

Commands

The following table summarizes the available FTP printing session commands.
Table B-1 User commands for HP Jetdirect FTP server
Command
user <Username>
cd <port#>
cd /
quit
bye
dir
ls
pwd
put <Filename>
bin
ascii
Ctrl C
rhelp remotehelp
ENWW
Example FTP Session on page
Ctrl C command to close the data connection.
Description
<Username> specifies a user. Any user is accepted and can print to the selected port.
Select a port number for printing. (On HP Jetdirect embedded print servers, only
port1 is available.)
Change to the root directory / of the HP Jetdirect FTP server.
Terminate the FTP session with the printer server.
Display the contents of the current directory. If entered in the root directory, a list of
available printing ports is displayed.
Display the current directory or the current HP Jetdirect printing port.
File name (<Filename>) to send to the selected HP Jetdirect print server port (Port 1).
Configure an FTP binary (image) file transfer.
Configure an FTP ASCII file transfer. HP Jetdirect print servers support only non-print
format control for character transfers (standard values for spacing and margins are
used).
Abort the FTP service command and any transfer of data. The data connection is closed.
Display a list of FTP system commands supported by the print server. (Use rhelp on
UNIX, or remotehelp on Windows 2000/Server 2003.) These are not user commands.
User-accessible commands depend on the client's FTP system.
168.
Use FTP printing 167