HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual page 183

Table C-1 HP Jetdirect EIO Menu on Graphical Control Panel (continued)
Menu item
Security
Diagnostics
ENWW
Sub-menu item
Print Sec Page
Secure Web
IPsec or Firewall
Reset Security
802.1X
Embedded Tests
Sub-menu item Values and Description
Yes: Print the current IPsec security settings.
No
NOTE:
server.
Require encrypted communication between a browser
and the HP Jetdirect embedded Web server.
HTTPS
The print server appears as a secure site.
HTTP/HTTPS
HTTPS.
NOTE:
print server model.
Specify the IPsec or Firewall status on the print server.
Keep: Retain IPsec/Firewall configuration.
Disable: Disable IPsec/Firewall operation on the print
server.
NOTE:
both IPsec and Firewall. Displays Firewall if the print
server does not support IPsec..
Reset security settings on the print server to factory
defaults.
No
Yes: Reset security settings to factory defaults.
Reset 802.1X settings on the print server to factory
defaults.
No
Yes: Reset 802.1X settings to factory defaults.
(HP Jetdirect embedded print servers only.) Diagnose
network hardware or TCP/IP network connection
problems.
Use an embedded test to check hardware and
communication paths on the print server. After you
select and enable a test and set the execution time,
select
Depending on the execution time, a selected test runs
continuously until either the device is turned off, or an
error occurs and a diagnostic page is printed.
LAN HW Test CAUTION:
TCP/IP configuration.
Performs an internal loopback test, which sends and
receives packets only on the internal network
hardware. There are no external transmissions.
Yes: Select this test.
(default): Do not print the current settings..
Displays only if IPsec is supported on the print
Required: Only HTTPS access is accepted.
Optional: Access using either HTTP or
The factory default setting depends on the
Displays IPsec if the print server supports
(default): Retain current security settings.
(default): Retain current 802.1X settings.
Execute to initiate the test.
Running this embedded test erases your
Graphical control panel menus 173