HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual page 182

Jetdirect print servers
Hide thumbs Also See for 630n - JetDirect Gigabit EN Print Server:
Table of Contents

Advertisement

Table C-1
HP Jetdirect EIO Menu on Graphical Control Panel (continued)
Menu item
IPX/SPX
AppleTalk
DLC/LLC
172 Appendix C HP Jetdirect control panel menus (V.38.xx)
Sub-menu item
Proxy Server
Proxy Port
Enable
Frame Type
Enable
Enable
Sub-menu item
Primary DNS
Secondary DNS
Values and Description
Router
Unavailable: If a router is not available, the print
server obtains its stateful configuration from a DHCPv6
server.
Always: Print server always attempts to obtain its
stateful configuration from a DHCPv6 server.
IPv6 address of the primary DNS server the print server
uses.
NOTE:
Displays only if
Manual
higher priority than
DHCP
in the Config Precedence
table, when configured using the embedded Web
server.
IPv6 address for a secondary DNS server that the print
server uses.
NOTE:
Displays only if
Manual
higher priority than
DHCP
in the Config Precedence
table, when configured using the embedded Web
server.
Proxy server to use by embedded applications in the
device. A proxy server is typically used by network
clients for Internet access. The proxy server caches
Web pages and provides a degree of Internet security.
Enter its IPv4 address or FQDN (up to 255 octets).
Contact your ISP for the proxy server address, when
required.
Port number used by the proxy server for client support.
This port is reserved for proxy activity on your network,
and can be a value from 0 to 65535.
Off: Disable the IPX/SPX protocol.
On: Enable the IPX/SPX protocol.
NOTE:
The factory default setting depends on the
print server model.
Frame-type setting for your network.
Auto: Sense all types and configure the first one
detected.
EN_8023, EN_II, EN_8022, and EN_SNAP: Frame-
type selections for Ethernet networks
Off: Disable the AppleTalk protocol.
On: Enable the AppleTalk protocol.
NOTE:
The factory default setting depends on the
print server model.
Off: Disable the DLC/LLC protocol.
On: Enable the DLC/LLC protocol.
NOTE:
The factory default setting depends on the
print server model.
configuration is a
configuration is a
ENWW

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents