Appletalk; Dlc/Llc - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

Table 4-10 IPX/SPX tab settings (continued)
Item
Job Poll Interval
PJL Configuration

AppleTalk

Use the AppleTalk tab to configure selected settings on the HP Jetdirect print server. For a description
of the items, see
NOTE: The displayed AppleTalk parameters include the printer types that are advertised on the
network.
The HP Jetdirect print server supports AppleTalk Phase 2 only.
Table 4-11 AppleTalk tab settings
Item
AppleTalk Enable
AppleTalk Name
Type
Zone

DLC/LLC

Select or clear the check box to enable or disable DLC/LLC protocols on the HP Jetdirect print server.
NOTE: On HP Jetdirect 635n print servers, all network protocols except TCP/IP are disabled by factory
default.
ENWW
Description
In the example, OU is an organization unit container and O is an organization container within
the NDS tree. The print server also accepts "marketing.mytown.lj".
To disable NDS support, leave the field blank.
NOTE: You cannot create NDS objects using the embedded Web server.
Time interval in seconds that the HP Jetdirect print server waits to check for print jobs in a print
queue.
Set the printer job language (PJL) parameters. Select or clear the check box to enable or disable
the following:
●
Banner Page Print separator pages between print jobs.
●
End-Of-Job Notification Forward an end-of-job message to a client application (if
received from the printer).
●
Toner Low Notification Forward a toner low message to a client application (if received
from the printer).
Table 4-11 AppleTalk tab settings on page
Description
Select the check box to enable the AppleTalk protocol. Current AppleTalk parameters stored
on the print server are displayed.
NOTE: On HP Jetdirect 635n print servers, all network protocols except TCP/IP are disabled
by factory default.
Name of the printer on the AppleTalk network. If you enter a name that is already assigned on
your network, a number is used to indicate the duplicate name.
Printer type advertised on the network. Display up to two types (for example, HP LaserJet and
LaserWriter).
AppleTalk network zone for the printer. By default, the current zone is displayed.
Click the Refresh selected zone Info button to refresh the list of available zones.
77.
Networking tab 77