Operating Notes - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

2. Enter the IP address or FQDN of the print server as the URL.
NOTE:
enclosed in brackets ([ ]). See your system documentation.
If you do not know the FQDN for the device (for example, printer1.support.hp.com), enter the host
name (in this example, printer1). Your system might resolve an IP address for the device.
Figure 4-2
3. If prompted with security alerts, click Yes to proceed.
By factory default, HP Jetdirect print servers and printers/MFPs with IPsec support are configured
as a secure site, using an X.509v3-compliant certificate installed on the print server for
identification. Encrypted browser communications through HTTPS is required for initial access.
Although not recommended, you can use your Internet Options menu to configure your browser
to ignore security warnings if the print server is configured to operate through HTTPS. See
Protocols on page
4. An embedded Web server page is displayed. The printer/MFP typically provides the initial page
that is displayed.

Operating notes

●
If you enter or change a configuration parameter value, click Apply to enable your change, or click
Cancel to erase your change.
●
The embedded Web server provides access to wireless network connection parameters on
HP Jetdirect wireless print servers.
CAUTION:
reconnect, you might need to adjust your system to the new settings.
If the print server loses its network connection, you might need to reset it to a factory-default state
and reinstall it.
64 Chapter 4 Embedded Web server (V.38.xx)
For browsers that support direct IPv6 address entries, an IPv6 address is typically
Entering an IP Address or Fully Qualified Domain Name
91.
If you change the wireless network settings, you can lose your connection. To
Mgmt.
ENWW