E120 And E320 Routers; Supported Modules For Shared Tunnel-Server Ports; Erx14Xx Models And The Erx310 Broadband Services Router - Juniper JUNOSE 11.2.X PHYSICAL LAYER Configuration Manual

For e series broadband services routers - physical layer configuration
Table of Contents

Advertisement

JunosE 11.2.x Physical Layer Configuration Guide

Supported Modules for Shared Tunnel-Server Ports

210
Unlike other line modules, SMs and ISMs do not pair with corresponding I/O modules
that provide ingress and egress ports. Instead, they receive data from and transmit data
to other line modules with ingress and egress ports.
See JunosE Release Notes, Appendix A, System Maximums for information about the
number of tunnels and sessions that each module supports.

E120 and E320 Routers

The E120 and E320 routers support the ES2-S1 Service IOA and ES2 4G line module (LM)
combination.
Unlike SMs and ISMs, you must install the ES2-S1 Service IOA with the ES2 4G LM to use
dedicated tunnel-server ports. The ES2-S1 Service IOA does not have ingress and egress
ports, but it conditions the ES2 4G LM to receive and transmit data to other line modules.
See JunosE Release Notes, Appendix A, System Maximums for information about the
number of tunnels and sessions that the ES2-S1 Service IOA supports.
Most E Series routers support shared tunnel-server ports; however, the supported modules
depend on the type of E Series router that you have.
See JunosE Release Notes, Appendix A, System Maximums for information about the
number of tunnels and sessions that each module supports.

ERX14xx Models and the ERX310 Broadband Services Router

The ERX1440 and ERX310 routers support line modules on which you can use shared
tunnel-server ports. The following module combinations offer tunnel services in addition
to regular access services:
GE-2 line module with the GE-2 APS I/O module installed
GE-HDE line module with the GE-2 SFP I/O module installed
GE-HDE line module with the GE-8 I/O module installed
E120 and E320 Routers
The E120 and E320 routers support shared tunnel-server ports on the following line
module and IOA combinations:
ES2 4G LM with the ES2-S1 GE-4 IOA
ES2 4G LM with the ES2-S1 GE-8 IOA
ES2 4G LM with the ES2-S1 10GE IOA
ES2 4G LM with OCx/STMx ATM IOAs
ES2 4G LM with OCx/STMx POS IOAs
ES2 10G ADV LM with the ES2-S1 GE-8 IOA
ES2 10G ADV LM with the ES2-S2 10GE PR IOA
ES2 10G ADV LM with the ES2-S3 GE-20 IOA
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2.x

Table of Contents